Service mode for TV PHILIPS SAMSUNG SONY SANYO PIONEER ORION ChinaTv (Part 07)

Service mode for TV (part 07)

SANYO ----- SONY

SANYO Chassis A8-B C28WK1N processor M37201E6-E8WW - hold the button "MEMORY" on TV, click the "NORM" on the remote control .. Exodus - POWER OFF.

SANYO chassis AS6A CE21CE1 processor LA76936DE,
chassis C5GS CE21KF8,
chassis FC3-G2 CF21KF8R processor QXXAVC305P,
Chassis FC6-A CE21FS2 processor QXXAVC568,
CE14SA4 processor LC863140V - to enter the service simultaneously press the "VOL +" on TV and "MENU" button on the control. Go to options - "MUTE", "timer", change parameters - "Vol +", "Vol-" .-) Also available submenus: "MENU" + "Vol-", "MENU" + "Ch +", "MENU" + "Ch-". Exodus - both "MENU" on TV and "MENU" button on the control.

SANYO chassis VEKO U99.190-07 CE28SW01, processor OM8363H/n3/4 CC6616 VATXMO, see TDA9345PS/N3/3/1913.- processor chassis E1

SANYO
chassis C5GS CE21KF8,
chassis FC3-G2 CF21KF8R processor QXXAVC305P,
Chassis FC6-A CE21FS2 processor QXXAVC568 .. Hold down the control button on "Menu", click on the front of TV "VOL +". Flipped mode - the buttons "Timer", "MUTE". Change the value of "VOL +" "VOL-". Also available submenus: "Menu" "VOL-" "Menu" "Ch" "Menu" "Ch-". Exodus - "MENU" on TV and "MENU" button on the control.

SANYO Chassis EB1-28 CEP2876DA, processor SAB8032 - press (MEMORY) on TV and immediately (INDEX / MENU) on the remote control. Exit - button (TV).

SANYO
chassis EB4-A C28ER17EE-00 C28EH/ER14/89, processor SAA5290ZP/033, C28EH65N processor SAA5290 - click (F) on the remote control button and immediately (P +) on TV. Exit - click (RECALL)

SANYO chassis EB5-W, CE28/32WN3, processor SAA5563PSM30053 - click the "VOL-" on the front of the TV and hold it down, click on the button panel zelenuyu (teletext).
In the service menu available memory initialization: for that go to submenyu MORE, choose position INI NVM, Confirm button "VOL +", exit the service mode and turn off the TV. Then turn on TV and set the station.
Profiles and HOTEL RENTAL - press and hold "VOL-" on the front of TV and press the RECALL button on the remote control. On the inscription: HOTEL: nn, where the first figure - a mode TV (0 - normal mode 1 - mode HOTEL, 2 - mode RENTAL); second figure - a program which was installed after you turn on TV mode is different from RENTAL HOTEL what button VOL + / VOL-active. To exit the mode or HOTEL RENTAL need color saturation set to zero.

SANYO Chassis EB-6A CE28DN5-C processor ST92R195, SE-28DN5C, CE32 FWH4-B - holding (F / OK) on the remote, press the (P-) on TV, or holding the green button on the remote, press the (P-) on TV . Exit - click (Recall).

SANYO chassis ED-1, ED1-28, CEP2572-00, CEP2573-2000 CEP2872 CEP2873 - simultaneously press "SERVICE" on the remote and "MEMORY" on TV. Button "SERVICE" = "RESET" (or TV / AV).

SANYO Chassis FB1-B CE29FS2 processor TDA12020H/N1F00 - on the remote press and hold [MENU], while at the front of the TV press [R +] 3-4 times (each time you change the screen saver menu). Exit - click on the remote [MENU].

SANYO chassis HA2A CE28BH2C CE28BH3C CE28CH2C - press and hold the green (GREEN) button on the remote control and simultaneously (P +) in front of the TV. Button RECALL - exit from the submenu. To initialize memory - press and hold (NORMAL) on the remote control and simultaneously (P +) in front of the TV, then you can turn off the power.
SANYO chassis NA2A CE-28BH-2 (option): - power off. Hold down the button "VOL-" on TV, turn on the power.

SANYO C28EH65N processor SAA5290
Click on "F" on the remote control button once and "P +" on TV. Exodus - "RECALL".

SANYO CE28DN5C, CE32FWH4-B has two types of service:
1. hold the "F / OK" on the remote, press the "P-" on TV.
2. hold the green button on the remote, press the "P-" on TV. The second service can not enter without first closing.

SANYO Processor M34300N4-628SP.
Unlock: Elections feed with "X" "X". Press the "S" and 3 seconds to keep the appearance of «SP -». Enter the code from the remote "9" "0" and press the "MEMO" on TV. Other options:
Activating search mode SP30? MEMO
SP ---
00 reset values set
01 reset all the special features
50 unit to power up through regular mode
51 unit to power up
70 Search for the channel scan
71 for erasing the memory channel scan
72 in addition to scanning memory
1990 unlock

SANYO CE29F60 processor TCL-A25V02-T0 8857CRNG5FF4 - see M113 chassis

SANYO CE14N01 processor TCL-A30V02-TO 8821CRNG5JB2 - see M28 chassis

SAPFIR (Sapphire). For switching the TV in service mode with remote control to dial the code 062 596.

SATURN ST1401. ST2101 - see the chassis M17, M28

SATURN ST2939A, - see chassis 5N11.

SATURN ST21NF1 - see chassis 3S10.

SATURN Series NF-1. To enter the service mode operating double-clicking the button "MENU" remote mode select "PICTURE MODE". After that point the remote control buttons to press "Q. VIEW" and "MUTE". Switch submenu button is "TIMER" on the remote. Exodus - "MENU".

SATURN chassis 3Y01 - see the corresponding chassis.

SATURN ST1422, ST21NF1D, ST21NF2, ST2199.
Turn on the remote control buttons to press: "MENU", "AV", "ANAL". Flipping page click "OK" Go - "PP".

SATURN ST1401 ST2101 - see M17 chassis

SATURN ST2132SF - for this model need a special service remote.

SATURN ST21F1 processor TDA9381PS/N3/2/1973 - see processor TDA9381-7NA.

SATURN
ST29F1. - Turn off the TV, click Control Panel "VOL +" and "VOL-" (or "PRG +" and "PRG-") and switch on TV.

SATURN 29SF1 - click on one button on the remote: "CLOCK" "PM" "Timer (clock). Output - Channel View button (DISPLAY).

SATURN chassis PX20043 ST-2104 TDA9381PS/N3/2/1973.
Click on the remote control "MENU", then dial 8500 (or 6483). To confirm the entry in service in the left corner will appear a red letter "M", subparagraphs choose numbers from 0 to 9 and then press "MENU". Exit - click twice "Standby" button on the control.

SCHNEIDER chassis DIGIT2000 STV6550 processor CCU2070.
Click both "S" on TV and the "C" on the remote control to exit - "TV"

SCHNEIDER chassis DTV3, DTV4, TV8, TV9, TV17, PT90, PT92 - see appropriate shvsi.

SCHNEIDER chassis TV9 PAL STV630 - entrance to service the same chassis TV8, TV9, but remote RC-6.
To install multystandartu (SECAM, D / K) must be installed option 0E20 = 01 for chassis TV9.1; 0E50 = 01 for chassis TV9.6

SCHNEIDER DIGITECH-300 processor CCU3001 - see chassis DTV-DTV-March 4.

SCHNEIDER VCT3831A see processor chassis M35.

SCHNEIDER Processor 1207H/N1D00 - see chassis M68.

SCHNEIDER RT9-110 chassis. STV-7016 TDA 9353PS/N1/2L0248.
Toggle menu into English, then: SUB-PAGE (clock THT) on the remote and "Volume-" at the TV.

SCHNEIDER TV1003. To enter service on the remote control buttons to press "MUTE", "RED", "EXIT". Exit from the menu - "EXIT".

SCHNEIDER chassis DTV101 - see chassis DTV3, but press "P +" and "P-".

SCHNEIDER chassis CTR AA - turn on the program 75, press "MENU" on the front and at the same time "i +" on the remote, then "i +".

SEG CT8050, CT8100 - see chassis 11AK18

SEG CT7800, CT5561 - see chassis 11AK19

SELECO chassis BS950 21/25/28SS564 processor SECO18A, SECO19 (SE8800UP).
Lock output processor 31 to S11 a lot. Click on "P / C" on the remote control.
Exodus - "TELETEXT".

SELECO chassis FPC2001 KU6360 processor TDA9364PS/N1/3S0509.
Sign in service: click once "M" on the front of TV and "POWER" on the remote control.

SELECO chassis FPC2002.2 51M12X30A processor TDA9350PS/N2/2/0771, TDA9350PS/N2/2/0563.
Sign in service - press the button once "OSD" (DISPLAY) on the front of TV and click "STBY" on the remote control.

SERINO STV2820
If you accidentally activate the access code to reset the TV it can be long (1.5 minutes) by pressing the button "VOL-".


SH
ARP Chassis 4BS-A, DV-5460SC, DV-5461SC, DV5462SC processor IX1492BMN3,
Chassis BCTV-A DV-5935H processor SAB8032,
DV5450SC, DV5451S, DV3760, DV3750S DV5460SC, DV5461SC, DV5462SC. DV5932H, DV5935H, DV5837H, DV6340S, DV6635H, DV7032SSN, 66AS06H (chassis BCTVA, BDTVA), DV5940H, DV6640H, 66AS05H (chassis 4BS-C processor SAB8032), DV5105H (chassis DECO-4), DV5107H, DV5132H, DV5135H (chassis DECO -5), DV3750H, DV3751H, DV5131H, DV5150H (chassis S3B)
To enter service mode need to connect the VIDEO terminal block 2 (block) and 6 (SV), or close the output processor 5 through a lot of resistance 100 ohms. Then press the MODE button on the remote control. A message "SERV". Then remove the jumper. Choice and control - "CH-" and "CH +". Exit - "MODE" or "POWER OFF"

SHARP DV3760H, DV3770H, DV5161H chassis 4BSA - closed three pins (GND) and 6 (service) TV connector on the main board (PWB), "appears on the screen SERV. Disconnect the pins 3 and 6.

SHARP
Chassis 5BS 37/54AM-12SC, 37/54M-16SC, 37/54AM-23SC processor IX1572BMNO (SDA20561-A529),
Chassis 5BS-A 54AT-15SC,
14T1U processor TDA11106H1/N2/3/AA8.
Chassis CS 70AS-05S, 70CS-06S, 70CS-03S, 63CS-03S. CPU SAB-S502.
Hold down the "VOL-" and "CH +" panel TV, turn on the TV Network button. Exit - "MODE" or "POWER OFF".

SHARP 37AM12SC, 54DT25SC 54AT15SC, 51AT15H (chassis 5BSA), 37DM23H, 37DT35H, 37EM33H, 51DR25H (chassis CA1), 51DS02H, 51DS03H, 51DS05H, 59DS03H, 59DS05H, 59ES03H, 59ES05H, 59ESD7H, 66DS03H, 66DS05H, 66ES05H, 66ESD7H (chassis CA10) , 51CS03H, 51CS05H, 59CS03H, 59CS05H, 59CSD8H, 66CS03H, 66CS05H, 66CSD8H (chassis CS), 66DW18H, 76DW18H (chassis CW100), DV5165H, DV5180H (chassis 4BS-B), DV5165H, DV5180H (chassis 4BS-B)
How to take hotel mode? At the same time (VOL-) on TV and buttons on the remote control.
How to enable service mode? Simultaneously press the button on the TV "VOL-" and "P +" and turn on the TV power fall into the service. Button "P +" You will reach the NVM memory, then you can "VOL +" to reach the address 4D and change the value to 00. It also turns off the hotel mode.

SHARP chassis CA-1 54DT-25SC, 54DT-26SC processor IX1655BMN1, IX1669BMNO (SDA5222),
chassis CA-10 66DS-03H, 66DS-05H, 66ES-03H, 66ES-05H, 70DS-03S, 70DS-05S, 70ES-03S, 70ES-05S processor IX1629BM (SAB-C161K-L16Q),
chassis CA100, DA100.
Hold down the "VOL-" and "CH +" panel TV, turn on the TV Network button. Exodus - "MENU".

SHARP
DV51083H, DV5903H, DV59083H, DV6603H, DV66083H, DV25071S chassis D3000. Press the switch S1401, located in module RWB-B. To exit click on S1401 again.

SHARP Chassis EURO-DS1 DV-5101H DV-5103H processor CCU3000.
Install jumper between the two output "building" and the output 6 "SV" alarm board located on TV (it contacts the "Tools" at the very top chip KM6264BLG-10). Exit - click on "SKIP" on the remote control to turn off the TV, remove the jumper.

SHARP Chassis EURO-DS1 DV-5403S DIGITAL processor CCU3000
To enter the service you need on-board digital color module briefly close contacts "Tools" at the very top KM6264BLG IC-10. Exit - close the second time these contacts.

SHARP Chassis GA-6 21L-FG1SX, 21L-FG1RU, 21M-FG1RU, processor IXB725WJN1
To enter service mode need to press keys simultaneously "VOL-" and "CH +" panel TV and turn on the TV Network button. When the grid, press "MENU". Exodus - POWER OFF

SHARP
Chassis GA-200 32JV-76E processor SDA6000
Hold down the "VOL-" and "CH +" turn on the TV panel TV Network button. Exodus - "STANBY"
• Use the P +, P-to move between options.
• Use the volume control buttons to change the data.
• For storage - Mario "STAND BY" or "STORE".
• To exit the service mode switch off the power.
Note: service mode with the color control buttons you can navigate directly to the adjustment parameters.
Press the red button to access geometry.
Click the green button to access the NVM.
Press the yellow button to adjust the ARU.
Click the blue button to adjust CUT OFF (cutoff).

SHARP chassis PAL-A 14D-SC, 14B-SC, 20B-SC, 14D-CM, 21D-CK1, CV-2132CK1 processor IX1704CENI. On board TV set switch position S1008 in the service mode. Exodus - S1008 bring back.

SHARP Chassis S3B DV-5450SC, DV-5451S, DV3760 DV-3750S processor IX1492BMN1 IX1492BMZZ - to enter service mode need to connect the terminal block VIDEO "2" and "6" (closed May processor output to a lot). Then press the MODE button on the remote control. A message "SERV". Then remove the jumper. Choice of regulation "CH-" and "CH +". Exit - "MODE"

SHARP Chassis SP-42M 25FN1, 29FN1 CPU M37210M4-775SP.
On board TV set switch position S1001 in the service mode. To display screen modes by one click on the S-MODE button on the remote control. Exodus - S1001 bring back.

SHARP chassis SP-51 14/21JN1
To enter the menu to provide 5 volts (through 100 resistor Om) 37 output processor.

SHARP chassis SP-70 processor 21FN1 IX2938CEN2.
To enter the menu to set the switch position S1006 in the service mode. To display on the screen one by one mode, press the key S-MODE, S-NORM on the remote, change the key on the remote control - up, down.
---------
Value system menu:
1. SERVICE MODE-service mode.
2. CUT OFF BKGD MODE-mode cutoff background.
3. H-CENT50 h/15-horizontal displacement "50 Hz"
4. H-CENT60 h/15-horizontal displacement "60 Hz"
5. RF AGC h/63 -?
6. VCO h/63 -?
7. SUB CON h/127-contrast adjustment.
8. SUB COL h/127-regulation color.
9. SUB BRI h/127-brightness.
10. SUB TIN h/127-saturation NTSC
11. SUB "VOL" two-volume
12. RF SUB "VOL" h/127-volume
13. BB CON regulation h/127-contrast blue background
14. BB BRI h/127-brightness blue background
15. D-TRAP SINGLE "DOUBLE" -?
16. F-TRAP HIGH "LOW" -?
where x-numeric parameter kokretnoho TV, the second number - the maximum adjustment, for example: "H-CENT50 5 / 15". Exodus - S1006 bring back.

SHARP Chassis UA-1 21AG-2S processor TDA9381PS/N2/1/0542 (IX3368CEN5).
Sign in service: lock switch on the board poses. Number 122 and 124

SHARP Chassis VP-2 VT-1428M, VT-2128M.
Set the TV in another mode, press the buttons on the remote control in the following sequence: "CH UP" for 2 or more seconds and simultaneously press the "POWER". Exodus - "MENU".

SHARP Chassis VP-6. Videodvoyka Sharp VT-1448M, VT-2148M
For service mode switch to STBY, then click on TV "CH +" and hold it for at least 2 seconds, press the TV button "STBY".
Options vysvichuyutsya service mode in the lower left corner of the screen and choose the buttons CH + and CH-, and data change "VOL +" and Vol-.
In direct access mode (DIREKT MODE) button digital remote install:
R CUT OFF -1 "-4" - "
G CUT OFF -3 "-6" - "
B CUT OFF -2 "-5" - "
G DRIVE GAIN -7 "-ctrilky" - "
B DRIVE GAIN -8 "-0" - "
Exit service mode - press "MENU" on the control panel, switch the TV mode STBY, turn off power to the TV.

SHARP 14 \ 21JN1 chassis SP-51: When the microcontroller input 37 for 3 seconds in a state of high level (+5 V), a transition in service.

SHARP 14R-SC/M8/M10, 14R-W, CV-14RU, 21FN1
On board TV set switch position S1006 in the service mode.

SHARP VT-1428M, VT-2128M. TV in STAND BY, power off, press the button on the front of the "P-" and "P +" within 2 or more seconds while the button POWER. Exit from the menu - click MENU.

SHARP 21D1, 21D2 processor IX3368CE (TDA9381).
To enter service mode to switch zakorotyty JA137 and JA138 for a short time while operating. Exit - again zakorotyty jumpers. Jumpers are livishe video processor, under them oval opening in the plate. Settings to control the type of G1342SA. Buttons "CHANNEL UP / DOWN" - move through menus; VOLUME + / - - change. Memorization is automatic.

SHARP 54DT-25SC - removing key:
Method One - Simultaneously "VOL-" on TV and a key button on the remote control.
The second method - simultaneously press the button sound minus and plus channel, turn on TV, get into the service, channel plus distantesya to "NVM memory", then "sound plus distantesya byte to 4D and change it to 00.

SHARP 72AS-18SN.
Sign in service - simultaneously press the CH + and VOL-TV and turn on. To save the revised information on the remote click "STAND BY" and turn off the TV.

SHIVAKI STV1415 STV2113MK2 - see chassis 11AK20.

SHIVAKI chassis DY300, DY321, DY350 STV1414 / T, STV2023, STV2110.
In the RC5 remote closed circuit 1-11 feet. Then, pressing "9", enter the menu white balance settings and geometry.
Out of service - "STAND BY".

SHIVAKI Chassis DY-900 STV29051. Click on "SERVICE" panel. This image appears on "Line SVC". Then click "-/--" panel.

SHIVAKI
H-chassis 501 STV-2119. To enter the service menu to consistently push the button on the remote control "DISPLAY" "MUTE" "SLEEP" "FUZZY".
Then when you click "DISPLAY" is geometry adjustment and AGC, and when you click SLEEP - white balance.

SHIVAKI Chassis H-50V, MC-41A STV-216 MULTI STV-2129 CS-29A6HTR. Press
"ST.BY" "MUTE" "MENU" "POWER ON". To exit power off the TV.

SHIVAKI STV-1465 processor 8821SRNG-4RJ,
chassis PAEX0078B-CY CTV2979 processor 8851CPNG,
chassis PAEX0078A-CY (M-1912) STV-2979 processor 8821CPNG4RJ1,
chassis PAEX0159A STV-2179 8821CPNG5UU5,
chassis PAEX0036G STV-1599,
chassis PAEX0171A STV-2175 processor 8821SRNG4RJ1,
chassis PAEXO199A STV-2183 processor 8897SPBMG6PN9,
STV-1469 processor 87CK38N - see chassis M28.

SHIVAKI CTV 2139 processor SAA5541PS/M5/0355.
When button is "AV" on the front panel power switch on the TV and hold "AV" to the emergence of a service menu on screen TV.
The second way: close to 250-500 ms contact service jack H760.
Select options button "P +" or "P-", change the value "VOL +" or VOL-.
Entry in memory - click "TV" remote control.

SHIVAKI STV-101 processor TDA9381PS/N2/3I1300
An option. Expand remote, need some button in the lower left.
2 option. Press the POWER - SLEEP - "MENU" - MUTE - POWER.

SHIVAKI STV-2038M4 - see CPU LC863332A.

SIEMENS chassis CM9300 FC202/204/206/210/212, processor ZC8864P ZC424701. While holding "i" on the remote, turn on the power. Exodus - POWER OFF

SIEMENS
chassis CUC6360 FS343 V6, processor XC68HC11F1B4. Sign in service: click on "MENU" "0" "8" 9 ".

SIERA SG1420N processor SAA5531PS/M4/0329
Zakorotyty resistor 3608 labeled SERVIS on the ground (installed near the processor). On TV Network button. In the left corner appears S. Service menu called OSD button on the remote control. Buttons "P +" and "P-" select "SIS OP", buttons "V +" and "V-" set in 2003 (to enable system PAL-SECAM, DK). Next, you must install the filter (instead of already established) 38.0 MHz for the normal passage of sound and color of DK-SECAM, and set capacitor 0,1-0,22 IFF by 38 foot chip STV2246C. The main menu select the desired system.

SINGER chassis FPC 2002.2 SL51M12X230 processor TDA 9350PS/N2/2/0771, TDA9350PS/N2/2/0563. Sign in service - press the button once "OSD" (DISPLAY) on the front of TV and "STBY" on the remote control.

SITRONICSSTV-2160F - see chassis M17, M28.

SITRONICS STV-1401, STV-2101 processor LC863532B - see chassis TV2KY.

SITRONICS chassis IET218821, TC2106A. STV-2131N, STV-2132F processor TMPA8803
To enter the service menu
1. switch the TV on channel 30.
2. switch the TV on channel 88.
3. Set the volume of 0.
4. Press "MUTE".

SITRONICS chassis CH-16 (S), 25F83, PF25F83, PF29F83. STV-2521N, STV-2522F processor TDA9384,
chassis EX-1A1, EX-1A4 STV-1421C, STV-2121N, STV-2122F processor TDA9381PS/N2/2T10.
Set volume to value "0" with remote control. Click the "MUTE" button on the remote and "MENU" on the front of the TV and hold them for 2 seconds. If done correctly you will see a letter «S» or «D».

SITRONICS SB-1415, SB-2139, CPU ST92185 - see chassis 3S10.

SITRONICS
SB-2106 processor chassis M5ENGV1 see M5.

SITRONICS
SB-2508 Processor TMPA8809 - see chassis M13.

SITRONICS SB-1419, SB-2108, SB-2135 Processor TMP87PS38N-M17 - see chassis M17, M28.

SITRONICS SF-2112 processor TMPA8821PSNG - see chassis M17, M28.

SITRONICS chassis SN9, SN9-EA, SB-2107, SB-2136, SB-2137, SB-2138, SF-2109 processor TMP87CM38N - set the volume to 0. Press MUTE on the remote control and, without releasing, press "MENU" on the front of the TV. If done correctly you will see a letter «D».

SITRONICS
LCD-2011/3777 processor SAA5264PS/M3/0104, video STV2248H.
Press "MUTE", "2", "6", "6", "0", "7", "1".

SITRONICSSTV-2160F - see chassis M17.

SOKOL (Falcon) Chassis A-2000-6155 processor 54TTS SDA555XFL/A-2000.
To enter the service menu sequence, press the buttons on the remote control "DISP", "EXPAND", "TIME".

SOKOL
Chassis A-2010Z A-2011Z 37TTS-6150, 51TTS-6150, 54TTS-6150, 37TTS-6152, 51TTS-6152, 54TTS-6152 processor Z90233/A-2010Z,
chassis 37TTS A-2011-6153, 51TTS-6153, 54TTS-6153 processor SDA555XFL/A-2010,
A-2015 chassis MONO A-2015-6151 STEREO 37TTS, 51TTS-6151, 54TTS-6151, 51TTS-6151S, 54TTS-6151S, 54TTS-6151SP processor SDA555XFL,
chassis 37TTS A-2025-6254, 51TTS-6254, 54TTS-6254 CPU Z9025506PSC.
To enter the service menu sequence, press the buttons on the remote control "DISPLAY", "FUZZU" (on some panels looks like an open book), "TIMER". Exit - click on "MENU".

SOKOL A-2020 chassis 37TTS-7261T, 7261T-51TTS, 54TTS-7261T, 37TTS-7261ST, 51TTS-7261ST, 54TTS-7261ST, 37TTS-7150, 51TTS-7150, 54TTS-7150 processor TDA9381/N2, TDA9351PC/N2/1I0982
Method 1. Turn off the TV once on the remote control mode and consistently press "DISPLAY" "ENTER" "MUTE" "POWER ON".
Method 2. Click the button hidden on the motherboard SB101 TV. The level of output voltage CPU 7 will be equal to 2 volts.

SOKOL Chassis A-2021 A-2022-7160 37TTS, 51TTS-7160, 54TTS-7160, 37TTS-7162, 51TTS-7162, 54TTS-7162 processor TDA9381PS/N2/I1326
In service mode you can enter two ways:
1. Click on SB108
2. Switch the TV to another mode, then press the remote button "Display" then "Enter".
Introduction to Memory - button "TV" or "AV" on the remote control.

SOKOL CH-16S chassis 63TTS-8739S, 63TTS-8739FS, 63TTS-8789FS, 72TTS-8739FS, 72TTS-8789FS, 85TTS-8789FS processor TDA9384PS/N2/3I.
To enter the service menu, set the volume to 0. Press and simultaneously hold the "MUTE" on the remote, press the control panel television "MENU". Exodus - Power OFF.

SOKOL chassis EX-1A EX-1A1 EX-1A2-37TTS 8798, 54TTS-8739, 54TTS-8739FS, 54TTS-8789FS processor TDA938X, TDA9381PS/N2/2I109.
To enter the service menu to set the volume control to 0. Click the button on the remote control "MUTE" and hold down, press "MUTE" control panel TV.

SOKOL
chassis 37TTS S-2042-7164, 51TTS-7164, 54TTS-7164. To enter service menu press the button "MENU" button on the control and then "8" "5" "0" "0". In the upper right corner of the screen appears the letter "M" red. For installations and regulations stipulated 10 submenus. Submenu called digital control buttons 0 to 9.

SOKOL
37TTS7364 54TTS7364S 54TTS7464FS - see TDA9381-7NA.

SOKOL 37,51,54 TTS6150, 6151.6155 CPU Z9023306PSC.
Sign in service: enabled on your TV remote to click on "DISPLAY" "FUZZU" "TIMER".

SOKOL
54TTS6100
Sign in service: enabled on your TV remote to click on "DISPLAY" "MUTE" "SLEEP" "FUZZU".

SONOLOR 5552, 6352, 6363, 6372, 6383, 7163, 7172, 7183, 63SN601 processor NES3AR01/02, NES2-2R01/4R01 - see EUROSTEREO-chassis 2.

SONY KV-M1440, KV-M2171, KV-M2181.KV-M2101, KV-2170, KV-2180, KV-2540, KV-25X1.KV-29X1, KV-24WS1.KV-24WS2, KV-25C1.KV- T25MF1, KV-14V5, KV-S29RN1/34RN1 / 25M1K, KV-16WT1, KV-C2173, KV-C2171.KV-2501, KV-C2503, KV-C2508, KV-C2509, KV-21T10R, KV-21C4, KV-21X4, KV29F3A, KV-G25T1, KV-X2901, KV-X2900B, KV-X2903E, KV-X2002U, KV-29X5A, KV-29FX11A, KV-C2901, KV-C2903, KV-C2908, KV-C2909, KV-29X1, KV-V5D, KV-14V6, KV-14V5, KV-M2171, KV-M2181KR, KV-16WT1A/K/R/U, SHR85340A processor, SAA5290, SDA5250,
chassis AE-3, BE-3B BE-3D, BE-3C, BE-4, BE-4A, BE-5, FE-1
chassis FE-1A, KV-21FX20A, KV-21FX20B, KV-21FX20D, KV-21FX20E, KV-21FX20K, KV-21FX20R, KV-25FX20A, KV-25FX20B, KV-25FX20D, KV-25FX20E, KV-25FX20K, KV -25FX20R, KV-29FC20A, KV-29FC20B, KV-29FC20D, KV-29FC20E, KV-29FX201D, KV-29FX201E, KV-29FX20A, KV-29FX20B, KV-29FX20D, KV-29FX20E, KV-29FX20K, KV-29FX20R , KV-29FX20U SAA5564PS/M3/0010
chassis FE-2, KV-14LT1V/E/K/U, KV14LM1V/E/K/U, KV-21LT1B/E/K/U, KV-21FT2K, KV-29FX30.
Press the button on the remote control POWER OFF -> ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV. The screen lights up TT__. Click "MENU" or two-digit number you to the various service sub: Pictute max - 01, Picture min - 2002, Ageing mode On-Off - 07, Exit service mode - 00.

SONY
chassis AE-2F, KV-S2941.KV-S2942, KV-S2943 CPU-SDA30C162GEG
Press 2 times the POWER button on the remote, you see the inscription TT__.

SONY chassis AA-2U KV-38FS17, KV-T25MF1,
chassis AA-2W, AG3, AG3E KV-29FV16A, KV-ES29M61, ES29N90, ES34K90 with remote control RM916, RM-959,
Chassis BG-1S, BG-2S, BX-1L KV-B21M1 with remote control RM 870,
Chassis G3F KV-K29CF1 remote RM-845P,
Bravia KDL-32V2000.
Press the button on the remote control POWER OFF-> DISPLAY -> 5 -> VOLUME + -> POWER. Buttons 1 and 4 - Selecting, 3 and 6 - the parameter, MUTING - for the record, 0 - to write.

SONY
KV-M2540: Sequence POWER OFF -> ON SCREEN DISPLAY -> 5 -> VOLUME + -> TV. Used console type RM-833

SONY
KV-S29 RN1 \ 34RN1 chassis G1: Remote control RM-821. Sequence POWER OFF -> DISPLAY -> 5 -> VOL + -> POWER.

SONY KV-G21M1 \ G21P1 \ G21S11, KV-T21M1 \ T21MF1 \ T21MN1 \ T21MN11: Sequence: POWER OFF -> OSD -> 5 -> VOL + -> POWER Exit from service: click twice on the button POWER. Memory write: enter the service, select the required options, press the MUTE button for options on the screen, click WRITE (green) record option. Press 0 to enter the memory

SONY chassis AE-2, AE-2A, AE-2B, AE-2F, AE-3, AE-5A, AP-2 (remote RM-831, 832), KV-2551, KV-S29JN1/MN1/SN1, KV-S34JN1 / MN1/SN1, KR-S4613. KV-B2911, KV-B2912V, KV-B2913E, KV-S2951KRKV-29K1R, KV-S2920.KV-S2921, KV-S2922, KV-S2923, KV-25T1R, KV-S2941, KV-S2942U, KV-S2943E, KV-29E1R, KV-X2560, KV-S2952, KV-S2953 CPU SDA30C162, SDA30C164,
chassis AE-4, GE-1 KV-25/29K1, KV-28FD1E / K, KV32FD1, KV-29C3.
Click on the buttons P + and P-front power switch and TV. Will light TT__. To go into service menu, quickly press the remote control to "0" i "1", and in some models, simply press MENU. Sometimes service functions - in the usual menu, point to DEMO.

SONY KV-29FX66E chassis AE-6B - remote RM-934.
1). Press the button on the remote control VCR-TV-DVD, to achieve emission remote "TV".
2). Press and hold the yellow button for more than 5 seconds, the indicator on the remote "TV" will blink.
3). Press 99999. All three indicators on the remote zasvichuyutsya. Gun is in service mode. Enable TV. Double-click buttons on the remote control VCR, the screen lights up TT__. Click on the remote control "MENU", you see the service menu. To withdraw from the service console mode, you must do items 1) and 2), and enter 000000.
read more...

Service mode for TV PHILIPS SAMSUNG SONY SANYO PIONEER ORION ChinaTv (Part 06)

TV Service mode for SAMSUNG SABA PROVISION POLAR RAINFORD ROLSEN (part 06)

PIONEER ----- SAMSUNG
PIONEER PDP-503PE (HDE)
To enter the service menu in the STANDBY mode, press ENTER, INFO, 0.

POLAR 37CTV3160, 54CTV3160 - see chassis 3Y01
POLAR 37CTV3165 - see processor VCT3831A
POLAR 54CTV3068 70CTV3052 - see processor TCL-A19V01-TO 87CP38N-4GD1


POLAR 13LTV1010, 17LTV1020. Processor LC863332B, TDA9381PS/N2/1I1150, TDA9381PS/N2/1I1246.
Sign in service menu: Turn on TV and in operating on the remote control buttons to press consistently "POWER", "MUTE", "CALL", "TIMER", ". Appears on the screen FACTORY. Press the button" TIMER ", starting first menu bar control the white balance. Go to the next line of control buttons is "CH", modified digital byte value - the buttons "VOL +/-".
POLAR
TCL-A19V01-TO 8821CPNG4GD9 TCL-A19V03-TO 8821CPNG4U88 TCL-A19V07-PO 8821CPNG5SV5 TCL-A30V02-TO 8821CRNG4JB2
- See M28 chassis

POLAR chassis S02 S02-R S02-RT S02-R39 S0201 S0202. 3700, 3701, 5100, 5101, 5400 - see the processor SAA5531 SAA5541 (CTV832R)

POLAR chassis S03-z 37CTV1015 processor LT01D 51KC,
chassis of the S04-R S04-RT S04-R39 S04-z S04-z39 processor SAA5541/832R SAA5531/832R LT01D 51KC.
Sign in service mode is possible in two ways:
1. On the remote control service, click "FACTORY".
2 .. Turn off the TV in another mode, the RC-0201 remote control press "MUTE" and turn on the TV is operating. Moving in the service menu are made with remote keys "CH-", "CH". Tinctures are the keys of remote control options "VOL-", "VOL +". Once the installation to exit the service mode and save the data on the remote control key press "MENU".

POLAR
chassis S05-z S05-I S05-z39 S05 S05-1 37CTV1010, 51CTV1010, 51CTV2010, 54CTV1039, 37CTV1410, 51CTV1410 processor SDA555XFL,
chassis S06-z S06-I S06-i1 51CTV1029, 51CTV2029, 51CTV2129, 54CTV1029, 54CTV2029, 54CTV2129 processor SDA555XFL,
chassis S52 S52-R S52-RTS processor CTV832R SAA5531 SAA5541 LT01D 51KC SDA555XFL:
Method 1:
Sign in service mode is possible in two ways.
Entry mode of SDM - Press 0 - 6 - 2 - 5 - 9 - 6 - button menu.
Entry mode SAM - Press 0 - 6 - 2 - 5 - 9 - 6 - button "display"
To TUNER KS-H-134 in the memory: 250-255-09-096-058-167-66
To TUNER DT-5BF-14D in memory: 250-255-09-224-058-167-66
Method 2.
On TV in operating on the service console press the "Clock" (on-board control in conventional circuits IC1 locking pins 1 and 15). Moving in the service menu are made with remote keys "CH-", "CH". Tinctures are the keys of remote control options "VOL-", "VOL +". Once the installation to exit the service mode and save the data on the remote control key press "MENU".
Withdrawal regime CASTLE: If forgotten confidential code, enter twice universal code "0711".

POLAR
chassis S07 S07-2 51CTV1229, 54CTV1229, 51CTV4029, 54CTV4029, 51CTV4929 - see processor TDA9351 / TDA9381.

POLAR chassis S08 S09 3701, 5101, 5401, 5401-STEREO. 37CTV4110, 51CTV4110, 54CTV4110, 37CTV4010, 51CTV4010, 54CTV4010 37CTV4015. - See processor TDA9351 / TDA9381.

POLAR
S-chassis processor 0906 37CTV4415 TDA9351PS/N2/2I1475 - - see processor TDA9351 / TDA9381.

POLAR Chassis 08-2560MT-MAN, 08-A2927U-OAT1E, 08-2559MT-MA2, 08-2959MT-MA3, 08-2960MT-MAN, T8-2561MT-MA1, M13, M24 63CTV3050, 70CTV3050, 63CTV3052, 70CTV3052, 70CTV3055, 63CTV3055,
Chassis 08-02159H-MA1, T8-2117MH-MA1, T8-2167MH-MA1, T8-2161MH-MA1, M23, M28 54CTV3060, 54CTV3062, 54CTV3065, 54CTV3068. Processor TMPA8803CSN - see chassis M28.

POLAR 3700 51CTV1010, 54CTV1039 - see processor SAA5531 SAA5541 (CTV832R)

POLYTRON chassis BML (HBEA-028B) MX-5203MS processor HBM-00-11M V.10
Sign in service: off mode Standby TV, press "MENU" and 1 s hold. Enter the Service code 1 0 March 1 "Service mode" or April 1 1 0 "Factory mode". To store data press "MENU" until the "stored" appears on the screen. To exit the service mode, turn off the TV in standby and switch on again.

LCD PREMIERA RTR-750 processor MST726-LF - universal remote control with IAC-2000, code 1312, entry button "2", bust button "7"

PRIMA
M2153 processor chassis TDA9381PS/N3/2/1831 Ingredients: Tuner - LINGHUA TDL-3N4G BXATB138, HR - STV9302, UNCH - AN17821A, power - 5Q0765RT. Log on remote: press [MENU], you will see a menu image. Press the number buttons [6] [4] [8] [3] on the remote control. To access the service menu M1 ~ M4, click the appropriate digital
button on the remote control. To log into the service menu 5 ~ M0, you must first press [CALL] to exit the M1-M4, you will see a letter "M", then click successively [LOCK] (picture suitcase with a handle) and one number buttons [5] [6] [7] [8] [9] [0] to enter the menu M5 ~ M0. If you're in some of the menu M5 ~ M0, then move to another menu can be done without pressing the [LOCK], but the number buttons.

PRINCETON AR2.7T
Hold the button "VOL +", switch network switch.

PROELCO, ELEMIS TAP2131, TAP2531, TAP2831 processor 82S52.
Close control points TR501. Hold R + R-"turn the power switch. Exit - take TR501.

PROELCO, ELEMIS, TRILUX Processor SDA20563-A508/A516/A518
Lock output processor 21 of the mass. Click on the TV "P +" and "P-" and turn the power switch. Exodus - POWER OFF

PROVISION
L-1418T, L-2021T, L-2121T processor SAA5290 (CTV810S) - see chassis TV91

PROVISION ST-1410T - see chassis TV84.

PT90 chassis, processor TDA9350PS/N1/2K0172, ST92195C7B1/MIF:
Option 1: press SUB-PAGE (clock THT) on the remote and "VOL -" on the front of the TV.
Option 2: press the green button "FEATURES" and type 1923 (model CINEX TV37911), or in the menu go to "FEATURES" and enter 1923.

PT92 chassis, processor TDA9350PS/N1/2K0172 - press SUB-PAGE (clock THT) on the remote and "VOL -" on the front of the TV.
PT92 (Option 2) - 5 output connector service closed within the enclosure 0,3-0,4 seconds.

QUELLE 5100 chassis FT7126, FT7128, FT7129, FT7191, FT71263 processor 83S1540
Sign in service mode: for up to 5 seconds. switching from push button TV, PRG, EXT. Exit: turn off the power.

RADIOTONE TV2050VT
If someone accidentally activated the access code to the TV and the camera is not turned on, reset the code in the following ways, depending on the type (of five) using remote control. They are assembled on different chips. When power is enabled TV and briefly connect some remote parts of terminals provided deaktyvuvannya (withdrawal) code. In the panels on the chips and M3004LAB1 SAA3004P connect their pins 2 and 18 on chips K51900-43 and OHS2015DN - 18 output circuit with the output anode of diode D6, and the chip GMS30150 - and its withdrawal in April 1917.

RADUGA (Rainbow) 5561, processor ST92195, video processor STV2248C - see chassis 11AK30

RADUGA (Rainbow)
37TTS6222 - see chassis TV2KY

RAINFORD
TV-1421 chassis 5889 processor TDA9341PS/N3/A/1999
Press the button "MENU", then dial 6483 to confirm sign appears "M". To exit press "Standby" button on the control. Removing the protection of children - code 4100.

RAINFORD TV-5510T, TV-7250T, processor TDA9353PS/N1/3S0342 - see chassis PT90, PT92.

RAINFORD TV5588SC CPU M37221M4-322SP - see M11D chassis

RAINFORD TV-5554 - press "VOL-" and "VOL +" on the front and "= o" (3 rysochky the clock).

RAINFORD
TV-6392 - with remote control RC-5 (or universal remote MAK-2000, which introduced code 1255), with separate adjustable contrast, brightness, saturation - click on the "contrast," other relatives remote control are performed. Exit - on the remote control RC-5 click "kontrastnist-.

RCA F38310
Hold "MENU" and "OK", press "VOL +" "MENU" "POWER" "VOL +"

REKORD (record)
Chassis G-1000 51/54 TTS5171 processor MC44002 MC44140
You must power off and turn it by holding the button on the toolbar "R + and R-. At the bottom of the screen appear the letters GLHPRGB A. Active highlighted in yellow. Changing the console with the button "menu" Settings "R + R-. Mode "G-" - U of kinescope setup, the screen shows a red or green square. Must be set so that they both quenched. Exodus - POWER OFF

REKORD Chassis H-501, H-501V PEKOPD XANTRAX 51/54TTS5168 51/54TTS5169 CPU Z8624704PSC - to enter the service menu to consistently push the button on the remote: "DISPLAY" "MUTE" "SLEEP" "FUZZY". Then when you click "DISPLAY" - geometry adjustment and AGC, and when you click SLEEP - white balance. Exodus - POWER OFF

REKORD ST-201 chassis 14/51/54 TTS5169 51/54TTS5172 STV9424 processor 80S31.
To enter the menu to hold the front of the TV press "MENU" and "CH +" turn on the switch network. Then withdraw from the TV STAND-BY in the usual way. Then a menu on screen. Exodus - POWER OFF

REKORD ST-208 chassis, ST-209 TC-1466, TC-2066S, TC-2166S, TC-2068S, TC-2168S, processor management MTV212MS64U, video processor TDA8842,
ST-210 chassis RECORD 51TTS5175, 37/51/54TTS5173, processor management MTV212MS64UB video processor: TB1238Z.
Sign in service regulatory regime from the normal control: in the regular mode of the TV series on the remote control button press MUTE, AV, "MENU", POWER. In the main user menu appears a new line - SERVICE.
To access basic service menu, press the remote button "VOL +".
Regulation of the function is pressing the remote button "VOL +" or "VOL-". Choose a new feature is a button on the remote control "P +" or "P-".
--------
Basic Tools:
SCREEN-reg. screen settings
CATHODE-reg. pezhymiv cathodes
TUNING-tuner option selection
SCR-subnasychenist
OSD Pos. OSD-position adjustment Horizontal
--------
Groups SCREEN, CATHODE, TUNING have their submenyu:
H SHIFT 1931 Horizontal centering
V SHIFT 1931 centering on a vertical
V SIZE 31 Size Vertical
V SLOPE 31 Vertical linearity
S CORR 1931 S-correction
--------
CATHODE:
R 1931 R in black
G 31 G in black
B 31 B in black
SBT 1931 Sub'yaskravist
SCT 31 Subkontrastnist
--------
TUNING:
AGC AGC 1931
CTT 5020E 38.9 Selecting the type of tuner
--------
This scheme can be used the following types of tuners:
UV1316 / S I2 38.0
UV1316 / S I2 38.9
CTT5020E 38.0
CTT5020E 38.9
IF automatically adjusted when choosing the type tuner.
Meaning of regulated functions are written in memory automatically. TV returns to normal operation after turning off the network and re-enabled.

REKORD chassis TD -18 (PAEX0088) 37/51/54TTS5177 51/54TTS5168 51/54TTS5176 TS-2076/2176 54TTS5172 TC-2172, processor management TMP87CK38N, video processor TD1238N.
Used three service mode: S, D, M.
S-mode - a service;
D-mode - extended service;
M-mode - + accelerated training.
Login to "SERVICE MODE" from the normal control:
operating of the TV, press and hold the button on the front panel VOL-(volume at minimum position), press the button on the remote DISPLAY. In the upper left corner of the TV screen appears the symbol "S", which means a service enabling a special mode of regulation.
Choose a new function is pressed on the remote control buttons or PROG + PROG-. Regulation of the function is pressing the remote button "VOL +" or "VOL" -.
When you click on the remote screen -/--na lost personnel scan.
Meaning of regulated functions are written in memory automatically.
TV returns to normal operation after turning off the network and re-enabled.
Joining the advanced D-mode service
1. In the operating mode of the TV to reduce the volume to 0 value, then press and hold the front panel button "VOL-", click on the remote control button "DISPLAY" (while the TV goes into the S-mode service).
2. Release the front of the TV button "VOL-", click the button on the remote DISPLAY. Double click on the front of the TV button "VOL-" and again click the "DISPLAY" (while the TV should go to service mode "D"-advanced service).
Use the specified rewrite the values in memory when the so-called processor failures (eg, involuntary initialization, zeroing set of values).

REKORD Chassis 200-100-TV2K 37/51/54 TC 5188, processor ST92185, video processor: STV2246.
Sign in service mode is possible with the revised remote control. You must remove the top cover panel, break a window at the bottom of the lid green button on the remote SERVICE (button entering service mode). Set in a window formed any button that has great practical significance, preliminary vyrizavshy it. Then click SERVICE, on your TV menu appears SERVICE V2.0.
Move the cursor is on the line by using P +, P-. Change the parameter value is controlled using the buttons "VOL +" or "VOL-".
Adjust the accelerating voltage is as follows:
-Set the cursor in the main menu bar at the Red Gain, at the bottom of the TV screen appears scale "G2 status";
Rotation-voltage regulator to set TDKS "G2 status" in position "OK".
---------
Setting IF is as follows:
By the terminals 10, 11 FCC connect signal cable IF (38.9 MHz, 50mV). When connecting the cable to ensure that output to 11 pidklyuchavsya output signal cable and output to 10 - housing;
-Set the cursor in the main menu on line VCO FINE 070. Adjusting coil L208 to the appearance of the inscription "AFC Status OK";
-Clicking "-" on the remote to find the lower limit of the range set IF (inscription disappears OK). Then click the "+" button on the control and increase the VCO FINE 5 units. Transfer the cursor to the VCO Coarce - must be installed in 2005 and light show "OK".
Exit - click SERVICE.
--------
D - service mode chassis PAEX0060
RCUT 80 (0 - FF) Adjust R
GCUT 80 (0 - FF) Regulation G
BCUT 80 (0 - FF) Regulation B
GDRV 40 (0 - 7F Regulation G
BDRV 38 (0 - 7F) regulation
CNTX 3F (0 - 3F) Sat. contrast MAX
BRTC 48 (0 - 7F) Sat. brightness CENTER
COLC 40 (0 - 7F) Sat. saturation in NTSC
TNTC 40 (0 - 7F) Sub.kol. tone CENTER
COLP 10 - (80 - FF) + (0 - 7F) Sat. saturation in PAL
COLS 54 (0 - 7F) Sat. saturation in SECAM
SCNT 0C (0 - 0F) Sat. Contrast "Y"
CNTC 30 (0 - 3F) Sat. contrast CENTER
CNTN 00 (0 - 3F) Sat. contrast MINIMUM
BRTX 35 (0-7F) Sat. MAXIMUM brightness
BRTN 31 (0-7F) Sat. brightness MINIMUM
COLX 35 (0-7F) Sat. saturation MAXIMUM
COLN 00 (0-7F) Sat. saturation MINIMUM
TNTX 28 (0-7F) Sat. color tone MAXIMUM
TNTN 28 (0-7F) Sat. color tone MINIMUM
ST3 25 (0-3F) Sat. Definition NTSC3.58 in TV CENTER
SV3 25 (0-3F) Sat. Definition NTSC3.58 in VIDEOCENTER
ST4 25 (0-3F) Sat. Definition CENTER Other color system in TV
SV4 25 (0-3F) Sat. Definition CENTER Other color system in AV
SHPX 35 (0-3F) Sat. Definition MAX points from Center value
SHPN 35 (0-3F) Sat. Definition MIN points from Center value
TXCX 35 (0-3F) RGB "OSD" in contrast MAX
RGCN 25 (0-3F) RGB "OSD" contrast MIN
VM0 0E (0 - FF) VCD mode data0 "Setting Data of TB1238"
VM1 00 (0 - FF) VCD mode data1 "Setting Data of TB1238"
HPOS 13 (0 - 1F) Horizontal alignment
VP50 03 (0 - 07) Vertical alignment
HIT 1D vertical size
VSC 09 Vertical S-correction
SBY 02 (0 - 0F) Zero-discriminator SECAM BY
SRY 05 (0 - 0F) Zero-discriminator SECAM RY
RAGC 19 (01 - 3F) delay adjustment ARU
AFT 1940 (0 - FF) Regulation FD
HAFC 00 (0 - 03) 1 / 2 AFC Data Adjustment
V25 25 (0 - 7F) Volume Output Data at 25%
V50 50 (0 - 7F) Volume Output Data at 50%
MOD0 42 (0 - FF) Mode Data0
MOD1 60 (0 - FF) Mode Data1
MOD2 05 (0 - FF) Mode Data2
SELF 00 (0 - 03) Test-self
SELF VOC 80 (0 - FF) VCO test-self
SELF AGC 69 (0 - FF) AGC test-self
SELF BRTC 75 (0 - FF) BRIGHT CENTER test-self
SELF CNTC 23 (0 - FF) CONTRAST CENTER test-self
SELF TNTC 00 (0 - FF) TINT CENTER test-self
SELF COL 20 (0 - FF) COLOR CENTER test-self
OSD 17 (0 - 7F) OSD-position on the screen
OPT 07 (0 - FF) Option Selection
Bit7-5: No Use. Bit4: 1 Not VT Down of AFT when no signal
Bit3: Audio Gain SW of TB1238
Bit2: V-MUTE On (= 1) / Off (= 0) when CH changes
Bit1: EXT-MUTE On (= 0) / Off (= 1)
when B.B is Off in no Signal
Bit0: MUTE On (= 0) / Off (= 1) when BB is Off in no signal

REKORD 54TTS5188 processor ST92185BN2B1/EUA TV2KV Ver.4.511, OSD processor MTV018N24-35, video processor STV2246 X43. Sign in service: Click the button on the remote control hidden under "P-" Chip remote SD3331AD (pins 8 and 17). Menu Design - enter the service and click "OK".

REKORD CT-2197K CPU TDA9381PS/N2/3102. Sign in service: in the native remote control hidden button (below and livishe V +). Clicking
displays "M" in the menu section 9. Exodus - hidden button and turn off the TV.

ROADSTAR CTV1433, processor ST6367 - see chassis 11AK20

ROADSTAR CTV1412XT processor SDA5552, SDA552 - see Chassis 12.4 / 5.

ROADSTAR CTV6010 processor ST92195 - see chassis AK19PRO, 11AK30, 11AK36.

ROADSTAR processor TDA9353, TDA9362 - see chassis CTG-AA

ROADSTARCTV1418 processor TMP47C634, SAA5288, SAA5290 - see chassis CTN-BB.

ROADSTAR CTV1010XK processor TMP87CM38N - see chassis CTS-AA

ROADSTAR chassis VE01, 1450KT, 2050KT, 2150KT, processor TDA9361
Procedure entrance to the service menu:
1. Press the button "MENU" button on the control.
2. Press 6,4,8,3 on the remote control.
3. M - appears on the screen.
4. Press 1,2,3,4.
5. To change - press Volume + / Volume-, to move from option to option-Channel + / Channel-on the remote control.
6. Stand By Clicking on the remote control to exit Service Mode.
---------
The procedure entry in Design Mode
1. Press "MENU" button on the control.
2. Press 6,4,8,3 on the remote control.
3. M - appears on the screen.
4. Press 5 on the remote control.
5. Click Lock on the remote, TV goes to Design Mode.

ROADSTAR CTV5512
Switch SW502 mode service menu.

ROLSEN C2910, C2519, C2988, C1410, C1420, C2116, C2118, C2119, C21R21, C2121, C2190, C21R90, C1420, C1425, processors CH08T0934, TDA9381PS/N2/2I1091 CH05T0102 EX-1A1, TDA9381PS/N2/2I1229, TDA9381PS/N2 / 2I1373.
Sign in service menu as follows:
1. Set the volume equal to 0.
2. Press the remote button "MUTE".
3. While holding "MUTE", press "MENU" on the front of the TV.
4. On the top right corner will light up the letter "D", and in the left corner shows an adjustable parameter and its value.
5. Pages menu change button "CAL" switch settings made green and red buttons on a blue field panel. Change made a yellow and blue buttons on a blue field. Note: do not change without the value of other parameters, it can cause loss of factory settings. When the factory settings to avoid loss of desirable first to record the value of all parameters on a piece of paper so you can restore factory settings in case of their loss.

ROLSEN S1455, S2156-S2159 CPU TDA9381PS/N3/3, C72FDS107, C72FDS109.
Press the button first [PRESET], then [TEST] remote service, on-screen in the upper right corner appears the letter M. To exit service mode, press [TEST] on the remote control service. You can also exit the service mode by pressing the [STANDBY].
Sign in service mode with user control: press [MENU], you will see a menu image. Press the number buttons [6] [4] [8] [3] on the remote control. To access the service menu M1 ~ M4, click the appropriate buttons on the remote control. To log into the service menu M5 ~ M0, you must first press [CALL] to exit the M1-M4, you'll see the letter M, then successively press [LOCK] (picture suitcase with a handle) and one with digital buttons [5] [6] [7] [8] [9] [0] to enter the menu M5 ~ M0. If you're in some of the menu M5 ~ M0, then move to another menu can be done without pressing the [LOCK], but the number buttons.
In service mode when you click [-/--] can log mode BUS OPEN. When you click the button going way out of this regime.

ROLSEN C2131, C2133, C2150, C2192, C2195
To enter service menu you can use one of the following ways:
1. Lock for a short time 1 and 3 contact connector X2 through resistor 2.2 kOhm.
3. Using the normal remote control, click the following shortcut:
• reduce the volume to "0"
• click the «MENU»
• select the icon "suitcase"
• consistently score "5" "1" "7"
• press the green button
Exit service menu by pressing the button TV / AV button on the remote control. This record is in memory of all service settings menu.

ROLSEN C1440, C2146, C2148, C2139, C2150SEZ
Button "V +" on the TV and the "0" on the remote in safe mode.

ROLSEN C2150Z processor TDA9381PS/N3/1/1730.
Menu similar to LG, the entrance to the service menu: set volume to "0", disable TV in another mode, press and hold the "V +" on the TV, then press the "0" on the remote, hold the click until the brightness of the glow LEDs Green did not increase. You should show povitsya IF 38.0, memory settings - click TV / AV on the remote control.

ROLSEN
C2160, C21R65, C2165, C21R65
Sign in service menu as follows:
Press the "Vol-" on the front of the TV, to reduce the volume to 0, click the "Display" on the remote control, keeping the "Vol-" on the front. To exit the service mode turn off the TV

ROLSEN C21SR80NT processor TDA9352PS/N3/1/1683, C29SR45T processor TDA9565, C29R25T processor TDA9352PXN, D29R55, C29R40T processor TDA9365PS/N3/5.
Entry: "St-by"> "MENU" on TV + "0" on the remote control. Exit> "TV".

ROLSEN C2135
In the service can login to normal control.
We must open the console closest to the chip contact area is taken up by the button. If the switch, the TV will enter service mode.

ROLSEN C1470 (S) (T), C15R80 (S) (T), C17R80 (S) (T), C2170 (S) (T), C21R70 (I) (T), C21R68, C21R80.
TV - in the regular mode, then hold the button "MENU" (in some firmware versions of the processor should use the "Volume +" on the front panel) TV and press "0" on the remote control.
To remember the settings click the button and the TV, hold it, turn off the TV from the network.
Removal of the castle: in the Options menu and select Castle consistently score 2 -2-I (white button).
Turn off the hotel: in the Options menu item indication, press and hold clock until the upper right corner appears the inscription HOTEL OFF.

ROLSEN C29R100, C29R140, C29R142, C29R148
Service desk at 100 Hz Rolsen done with any RC-5 compatible (on the 3010 chip).
Enter service mode (do consistently):
SVC 1.Natysnuty button on the remote control service for half a second (or closed at the same time, contacts 1 and 11).
2. Click "OK" button on the remote control.

ROTEX
TH-2986S - see START 1416A, 2136QF.

ROTEX chassis U3P/U2P TH2196 processor TDA9381PS/N2/2I1318 - see processor TDA9381-7NA.

ROYAL TV6399TSN, TV5599TSN, TV5490TSN processor ST9 MONICA 5.
On TV, pressing the button a few seconds "VOL-" and "VOL +" on the front of the TV.
Exit: CLEAR button or power off.

RUBIN (Rubin) 72DS10 72FDS10 55FS10 55FM09-8 37M10 51M10 63M10 72S10, processor TDA9381PS/N2/1I0721 RUBIN OSD V1.2 M10,
TDA9381PS/N2/1I0836 RUBIN_OSD_V1.4 M10,
TDA9381PS/N2/1I1156 RUBIN_OSD_V1.5F M10,
TDA9381PS/N2/1I1520 RUBIN CLK V1.7B,
TDA9381PS/N3/1/1729 RUBIN CLK V3.0A M10.
To enter the service you need in safe mode press the menu button on the front of the TV and the "0" on the remote control.
To remember the settings you have to click "TV" and hold off from network TV
Removing lock: enter the Options menu, select Castle, dial "2", "2", "white button".

RUBIN
range of S06. To enter service mode in AV button is power on the TV and hold it five seconds, or close to 250-500 milliseconds contacts 6 and 7 service connector.
Select options button "P +" or "P-", change the value "VOL +" or "VOL-". Making the memory button "TV".
Installation / removal mode "hotel"
1.Zayty in the "Features" menu (the menu button or the blue button remote control).
2.Vstanovyty with transparent background panel menu (see Manual).
3.Vstanovyty cursor to the line-turn.
4.Natysnuty and hold the remote on / off button hidden teletext reception to appear in the right corner of the screen caption HOTEL ON / OFF.
Mute mode lock without dialing code:
1.Vviyty Features menu (the menu button or the blue button remote control).
2.Vstanovyty with transparent background panel menu (see Manual).
3.Vstanovyty cursor to the line lock.
4.Natysnuty and hold the remote on / off button hidden until the reception of teletext caption CASTLE OFF
NOTE: CASTLE line can be displayed in the Options menu, if enabled mode HOTEL, chassis M06.

RUBIN S07 processor lineup SAA5531PS/M4/0599.
On television when you click "Vol +" and "MENU" on the front of the TV.
Navigation menu - buttons "R +" and "P-" buttons to adjust "Vol +" and "Vol-"

SA-A chassis controller LA76931, LA76936, LA76938 - see CPU SDA5522.

SABA NR26LXC29 delay in service menu: "MENU 9301".

SALORA 28F8 32F8 36F8
To enter service mode press "II", "I", ">", "IV".

SALORA 28N8S processor ZC410929P - see chassis EUROSTEREO, 2B-F.

SALORA 25V80, 28V80 29V100 processor SDA30C163 - see chassis FEATURE STEREO.

SALORA
M1 chassis 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI processor CCU-SALO-07 (CCU20XX) - Entrance "C", "*", "O / V", "#", "M". Exodus - "TV".

SALORA Chassis M2 DIGI STEREO 25M9C processor CCU-SALO-09 "CCU20XX"
input "P +", "*", "O / V", "#", "M". Exodus - "TV".

SALORA 14MP50 VT, 20MP50 VT, 21MP50 VT processor SAA5222, SAA5223, SAA5253, SAA5255 - see chassis MONO PLUS 2

SAMPO - Network device reset button and hold for several seconds.

SAMSUNG chassis KS1A CS 2139TR CS21A0QWT CK-564BVR CZ-21H12T CS-25M6HNQ CS-21S4WR CS-21S1S CS-21D9 processor SAA5291PS/135,
chassis KS2A CS2902, CS-21AOWTQ processor SDA5555, video VDP3120B,
chassis KS7A CS-29K10MQQ processor VCT49X3E PY E 1000 (T-ETRASF 1002),
Chassis: KS9A CS-15N11MJQ SS14H2, CB15R2X, CS20H2, CB20R1X, CB21F5X, CB21DBCX, CS21M16M QZXNWT, CS21M20M QZXNWT,
chassis KS9B CS-21M6MQQ processor TDA9594PS/N1/5I,
KSBA 21Z43ZGQ processor chassis TDA12176PS,
Chassis L63A SP-61L2HR, L63A SP-43L2HR,
chassis S16, CS-29K5ZQQ processor TDA 12025PQ/N1F80,
chassis S51A CK-2199X3X/VWT, CK-22B4VR, CK-22B5SXR, CK-25D4V3X/BWT, CK-25D4VR, CK-28C7VD3X/XEH, CK-2902NXR, CK-2902SXR, CK-29D4V3X/BWT, CK-29D4V3X / NWT, CK-29D4VR, CK-30D5X3X/NWT, CK-564BVR3S/NWT, CK-565BSR3S/NWT, CK-566BSX3S/NWT, CK-567BV3X/BWT, CK-568BSX3S/NWT, CK-568BSX3X/NWT, CK - 6202X3S/NWT, CK-6202X3X/BWT, CK-62D4V3X/BWT, CK-7202SX3S/NWT, CK-72D4V3X/BWT, CK-765DSX3X/NWT, CK-765DSXR processor SAA5291PS/135,
chassis S63B processor Shine2 CW29Z308TXXXEC,
chassis VC20EO LM20M21C,
CZ-14F-12T, CW-21M63N processor SDA5555,
LCD LE20S52, LE40S71B,
Processor TDA9381PS/N1/3S0333 SPM-802ERN5, TDA9381PS/N2/2/1642 SPM-802EEN6, TDA9381PS/N1/3S0293 SPM-802ERN4, TDA9381PS/N1/3S0250 SPM-802ERN1.
Press the sequence (STAND-BY) (DISPLAY) (MENU) (MUTE) (POWER ON), or (STAND-BY) (INFO) (MENU) (MUTE) (POWER ON), Go - POWER OFF
Service menu consists of four components:
ADJUST, OPTION, G2 ADJUST, and RESET.
For selecting and adjusting the parameters using buttons /-CH and /-Vol.
To exit the service menu press the button POWER OFF.
Options: AGC 15, VCO 80, SBT 7, SCT 7, SCR 10, SC0, RG 1945, BG 1945, CDL 3, STT 5, LC) 0, VOL 10, PSL 13, PVS 1957, PVA 1930, PHS (left -right) 35, PEW (width) 50, PEA (arc) 33, PET (trapeze) 0.

SAMSUNG Chassis: SCV11A, SCV11D, TVP3350, TVP5050, TVP5350, TW33501S,
Chassis SCT-11D CK-3338ZR1BWX, CK-3373TR1BWX, CK-3373ZR1BWX, CK-5038ZR1BWX, CK5073ZR1BWX, CK-5373ZR1BWX, CK-5079ZR1UKCX, CK-5085ZR1/ZBR1/TBR1BWX, CK-5339ZR1/TBR1/TRB1BWX, CK-5379TR1 / ZR1UKCX, CK-5385TR1/ZR1/ZBR.
Login - STAND-BY -> P. STD -> MENU -> SLEEP -> POWER ON.
The second option - STAND BY -> P. STD -> HELP -> SLEEP -> POWER ON. After logging into the service mode menu appears on the screen: ADJUSTMENT, OPTION BYTE, RESET.

SAMSUNG chassis KS3A CS25M6HNQ processor SDA555X,
chassis S56A CZ-29M64N, CS-21M6, CS-21S8MHQ processor TDA9594PS/N1/4I1021 (SPM-836EE).
Login Service: (PICTURE OFF) (DISPLAY) (MENU) (MUTE) (PICTURE ON)

SAMSUNG chassis P1B CB5373Z/UKV CPU Z8933212PSC-R1971, SAA5290ZP-020
chassis SCT11A CS-5038Z processor SZM-139M3, video M52039SP,
chassis SCT11B, SCT12B, SCT-13
CK5038ZR CK271WP CK6202 CK7202 CK-5379ZR CK6271WP CK331EZR48, CK333EZR4X, CK3366ZR4X/BWT, CK3373ZR4X/BWT, CK501EZR4X, CK503EZR4X/BWT, CK5066ZR4X/BWT, CK-5039ZR4X/NWT, CK-5385ZR, SC-3339Z processor SPW149-2001 Z8933212PSC,
chassis SCT57A CK-7202WTR,
chassis SCT57C.
Sign in service:
(STAND-BY) (P. STD) (HELP) (SLEEP) (POWER ON). Exodus - (STATUS) or (HIDDEN).
Approximate installation service menu: ADJUSTMENT AGC20, VCO88, SBT10, SCT15, SCR10, SC10, RG35, GG40, BG41, CDL0, BLU0, PSL20, PVS44, PVA45, PHS44, NSL20, NVS40, NVA50, NHS40, OPTI BYTE: BYTE0 08, BYTE1 99.

SAMSUNG Chassis SCT-51A SCT-52A CS7272 CS6277 SS7277 CS-721, CS-723 CPU RM132ER-SSOM132ER (CXP85340A-152S/176S).
Sign in service:
(PICTURE OFF) (SLEEP) (P. STD) (MUTE) (PICTUPE ON). Exodus - (STATUS).

SAMSUNG chassis SK15 CS-29A6HTR PLANO.
Sign in service:
(STAND BY) (DISPLAY) (P. STD) (MUTE) (POWER ON), Go - (POWER OFF).

SAMSUNG chassis S65A P9050L, CXA2165Q, TW9906, SMP6773, processor SAA5291PS-135,
chassis SCT57B CK-22B5SXR CK-565BSXR SAA5291PS-processor 135.
Login Service: (INFO), (FASTORY), (FASTORY). Exodus - (MENU) or twice (FACTORY).

SAMSUNG chassis S15A CK2139XR processor SAA5291PS-097
1. TV switch to operating mode.
2. on the remote press "sleep" with a logo clock.
3. click on the remote control button hidden "factory".
You will see signs: ADJUST OPTION RESET
Regulation of V-, V, P-, P.
Adjust value: AGC September, VCD 1980, SBT 8, SCT 1910, SCR 1910, TSC 1913, SC 1912, RG 47, GG 32, BG 34, CDL 4, LU 0, PSL 32, PVS 32, PVA-1942, PHS -40, OPTION better not touch. input in memory - "sleep", output - 2 times "Factory"

SAMSUNG chassis Z68 CI5937AN, CI6837AN
Sign in service menu:
Option 1. Press the service button hidden on the front of TV.
Option 2. In STANDBY mode, press the remote control:
"Video prefer", "A / V", "Sleep timer", "Power".

SAMSUNG Z68 processor chassis SIM131
Sign in service menu:
In STANDBY mode, press the remote control: "AV" "SLEEP TIMER" "POWER", beginning - "POWER OFF".

SAMSUNG chassis Z70 CK-6271WP CK-7271WP processor SIM 131-1 C69532Y, CS-21K3ST.
To enter service mode need to turn on the TV is operating, then click the button panel in the following sequence: "STAND BY" "MUTE" "1" "8" "2" "POWER ON". Exodus - "POWER OFF".

read more...

Opel diagnostic connector pinout

Opel 10 pin diagnostic connector pinout

image
10 pin Opel custom connector
at the Opel car

for 1988-1996 Opel models

Pin
Number

Name
Description (may be empty)
A GND Ground
B   Slow self-diagnostic codes. Engine diagnostic K-Line.
C   Automatic transmission slow self-diagnostic codes. Transmission diagnostic (L-Line).
D   Trip computer slow self-diagnostic codes. Engine diagnostic K-Line.
E   Slow self-diagnostic codes out.
F +12V Accumulator +12v
G K-Line Automatic transmission, engine, ABS diagnostic
H   Cruise control, ATWS slow self-diagnostic codes.
J   4WD slow self-diagnostic codes.
K   ABS slow self-diagnostic codes. ABS L-Line.


Opel OBD II diagnostic connector pinout

 

image
16 pin J1962 OBD-2 car custom connector
at the Opel car

all after-1996 Opel models

Pin
Number

Name
Description (may be empty)
2 K-Line ABS diagnostic
3 K-Line Radio, automatic transmission, immobilizer, steering wheel and other components
4 GND Chassis ground
5 GND Signal ground
6 CAN-High, J-2284 If car isn't equipped with CAN bus, you'll find self-diagnostic slow codes (e.g. on Astra-F-G) or ABS K-Line at this pin
7 K-Line Engine, ABS, AT, Airbag, Navigation system, Radio diagnostic
8 K-Line TID, MID diagnostic
9 K-Line ABS, Airbag
11 K-Line Automatic transmission diagnostic
12 K-Line TID, MID, ABS, AirBag, air conditioner, Kuhlerlufter-Steuergerat
13 K-Line immobilizer, MID, Airbag diagnostic
14 CAN-Low, J-2284 if CAN present
16 +12V Accumulator

 


Opel OBD II diagnostic interface pinout

image
16 pin J1962 OBD-2 car custom connector
at the opel car

Pin
Number
Pin
Name
Opel vehicle function
1   n/a
2 J1850 n/a
3   K-Line, K2, TCM, Sunroof, CDL, Multi-Timer
4 GND Chassis ground
5 SGND Signal Ground
6 HS-CAN Blinkcode
7 K-Line K-Line, K1 (engine)
8   K-Line, K4
9   reserved
10 PWM n/c
11   reserved
12   K-Line, K3, ABS, TC, Steering, RTD, OW
13   reserved, K-Line, K5
14 HS-CAN(-) reserved
15 L-Line n/c
16 Battery+ Battery +, unswitched

http://pinoutsguide.com

read more...

Service mode for TV PHILIPS SAMSUNG SONY SANYO PIONEER ORION ChinaTv (Part 05)

TV Service mode (part 05)


ORION ----- PHILIPS

ORION 28BDF TV790 (4400 chassis, processor SAA5297PS/262,
TDA8843, 8844). Vvimkuty power, hold the button "MENU" on the front panel until the LED light. Then turn on the remote control "STBY". To exit the service on account of new options - "MENU OFF" on the remote control.

ORION
chassis 7000 7300 ORION LIFETECH LT-7500 processor uP83C055
Turn on the TV, hold button "MENU". Press the "SAT". Exit service mode - "TV".

ORION chassis BS990 CT63S92, CT71S92, FT5916 processor TVPOSM90.02/03
Press the button on the TV "OSD" "P-" "VOL-" and turn the power switch.

ORION chassis CODE A TV-3789F processor PCM195C30ECF0098, TDA2248, TDA8174A, FNI14B002
Press the "V-" on the front of TV and "6" on the remote, a little hold.
Contents of memory:
SECAM at 2A-F8
DK at 1D -41
You can use a "MAK-2000" code 1443.

ORION
chassis CTS-AA TV 5176TX processor SAA5531PS/M4/0329
Sign in service menu:
Off TV Network button. Lock 7 foot lot on the processor. Enable TV. The screen in the lower left corner appears the letter S. Click on RECALL. To write to memory - press RECALL.
Exit service mode - turn off the TV Network button.

ORION chassis PCB8500 TV82301 SAA5667HL video processor. VSP9402
Press the button "MENU" on the front of the TV and hold the power switch. Exit - click "ST-BY", visit the IAC: Code 1097, "Shift + blue button.

ORION chassis T08-29K SPP2123F processor 8891CPBNG6KU3
0 Set the volume while pressing on the front of TV "VOL-" and DISP (rectangle) on the remote control.
Advanced service - in the section "F7 Page" put "1".
Switching pages - click on "MUTE" on the remote control.
Exodus - "MENU".

ORION chassis-processor TM8402A TV1470MJ OES6047V Videoprotsessory TB1226CN
To enter service menu you must click once on the remote control "9" on the TV and "VOL-".

ORION CTV222M processor TVPO2066-A41, chassis DIGIT2000, ORION KENDO UNIVERSUM 6325, 6325VT processor CCU2030.
Sign in service mode: short closed 15 and 23 feet KR1506HL1 in remote RC-4. Save your settings: You can use the remote ->.<- from TV "Horizon" with no graphics and click "SERVICE".
In service settings:
option1______ option2_______option3_______ option4
1: ON________ 1: OFF________1: ON _________1: OFF
2: ON _______ 2: OFF________ 2: OFF________ 2: ON
3: ON________3: ON _________3: ON _________3: OFF
4: OFF_______ 4: OFF_______ 4: OFF_________4: OFF
5: OFF______ 5: ON ________ 5: OFF_________5: OFF
6: OFF_______ 6: ON _______ 6: ON _________6: OFF
7: OFF_______ 7: OFF_______ 7: OFF________ 7: OFF
8: ON ________ 8: ON _______ 8: OFF_______ 8: ON
Go - POWER OFF

ORION MP2121U processor SDA555XFL. Videoprotsessory M61208
First ->.<- push button (two arrows meet separated horizontal stripe) or just FIX.
There's four entrances, though you need 9871, 9872, 9474, 9373. FIX button pressed before each set of figures. Output - 2 times "MENU".

ORION MP2927U. Processor VCT3833, sound MSP3413G
Click quickly "headphones" "--/--", "Headphones", "timer" - once in service menu.
Twice "menu" - geometry. R +, R-"Change," VOL + "," VOL-"- change the value. Save - "OK" immediately after the change.
Exit - to select "EXIT", press "OK."

ORION PLT7051 LCD 7 processor MTV512GMV, video T100A FP3797-1/3506TLDA2
TV - in dezhurnyy mode, and remote dial CH-> CH +> CH-> "MENU".

ORION
TV2180MK6 processor OEC6027A
1. Switched on the TV hold the "VOL-" to a value of 0.
2. Off TV Network Network button.
3. Click on the front of the press "VOL-", not releasing it on the remote press "9" and hold them, turn on the TV and press the Network button on the front panel button "STAND BY".
Menu has two submenus.
Select items submenu is pressing the corresponding "license" klavish on the remote control. Control parameters are the keys "VOL + / -" or "-SET" on the remote control. Exit the submenu items and move from one submenu to another is the same combination: "VOL-" and, without releasing, press the remote key "9". Exit service menu is a choice item "8" in any submenu or by pressing the "POWER".

ORSON HINGWAH a chassis-VO CT-2120 processor ST6C-ELAINE2
From remote "SKIP", "VOL-", "FINE TUNE", "-". Selectable - PROGRAM

PACE PRIMA
MSS100 MSS200 MSS500.
Entry: "MENU", "0", "STORE", "RIGHT ANOW", "LEFT ANOW"

PALLADIUM TV-100 chassis - see SCHNEIDER chassis DTV3, DTV4, TV17.

PALLADIUM Chassis PC100 765/325 765/368 765/384 processor ST92T93
Enable TV network switch, pressing the button "VOL +" and "VOL-". Press the POWER button on the remote control to exit - POWER OFF

PALLADIUM
Processor TMP87PS38N "FO726XAC"
Sign in service: click on "VOL-" on TV and "DISPLAY" on the remote control.

PANASONIC Chassis AC1 TX-G10 / C
Install 60. Parameter SHARPNESS - at least. Press "OFF TIMER" control and hold, press the "V" on the keypad TV. Exodus - "NORMAL"

PANASONIC chassis APEDP264/266 APEDP264 CF27SF14/24/34V CT-31F24 CT-31XE24CV CT-F29992LV/W/XV - zakorotyty point FA1 and FA2 or pins 3 and 8 TP connector, located on-board A-board.
Exit: click button "ACTION" and "POWER" for 2 seconds.

PANASONIC
chassis CP-185 TDA9381PS/N2/3I0785 MS9381/N2/3_DE1. Install the program in 1999, "Sharpness" = 0, press "MUTE" and "P-" on the front of TV and "Display" on the remote control.

PANASONIC chassis CP-521 TX-29PM1P processor TDA12021H1/N1D01.
Install 99. SHARPNESS parameter to a minimum. Press MUTE on the remote control and "V" on your keyboard TV.
Exit «Power OFF».

PANASONIC chassis CP-830FP TX-32PS12P processor SDA55xx
Install 99. SHARPNESS parameter to a minimum. Press MUTE on the remote control and "V" on your keyboard TV.
Exit «Power OFF».

PANASONIC
Chassis EURO-1 EURO-2 E2100 TX-21AD2C TX-29A3C TX-25A3C TX-W28R3 TX-21MD1C TX-W28D1F processor CCU30001-05
Set the regulator "BASS" to "max", and regulator "TREBLE" to "min". Click on "F" on the TV. Press and hold "VOL-" on TV. Click "REVEAL" on the remote control. Exodus - "NORMAL"

PANASONIC Chassis EURO-2M, EURO-3, EURO-3H, EURO-3W, EURO-3HW, EURO-3HWS, TX-25AD50F TX-XD60C TX-W28/32/36D2DP/L processor SDA30C164 - press and hold "VOL-" Front and simultaneously press the remote REVEAL. In all variants instead of clicking REVEAL be RESET. Buttons RED (RED) and GREEN (GREEN) - move functions to service menu, YELLOW (YELLOW) and blue (BLUE) - modified the options button STORE - remember. Button NORMAL - exit the menu.

PANASONIC:
Chassis EURO-3 EURO-3H EURO-3W EURO-3HW EURO-3HWS TX-25AD50F TX-XD60C TX-W28/32/36D2DP/L processor SDA30C164,
Chassis EURO-4, EURO-4H TX-25LD4C, TX-28LD4C, TX-28PK25 processor SDA5450C48GE, SDA5450C59,
Chassis EURO-5 EURO-7ATX-25/28AD90F TX-32D5F ТХ-32PB50F / P:
Set the regulator "BASS" to max, and the regulator "TREBLE" to min. Click on "REVEAL" or "INDEX" button on the control (in all variants instead of clicking REVEAL be RESET), simultaneously press and hold the "VOL-" on TV. Exodus - "NORMAL"

PANASONIC
Chassis EURO-10 TX-29PS1F
Set the regulator "BASS" to max, and the regulator "TREBLE" to min. Click on "F" on the TV. Press and hold "VOL-" on TV. Press the "INDEX" on the remote control. Exodus - "NORMAL"

PANASONIC chassis GAOO70 TX2170T processor MN152811TJN
Hold on TV "VOL-", click on the remote "screen with a plus.
Exodus - "NORMAL"

PANASONIC chassis GL1 TC-21GX10BS Protsescor TDA 12120H1/N100
Entry: "VOL-" = 0, timer = 30 minutes, RECALL on the remote and "VOL-" on TV. Edit menu - buttons "1" and "2". Navigating the menu buttons "3" and 4 ".
Exodus - POWER

PANASONIC chassis GLP22 TX-32LXD7 TX-32LED7F TX-26LXD7 TX-26LED7F
Sign in service: click and hold "- / V" on the front of TV, press 0 on the remote 3 times within 2 seconds.
To exit - EXIT button on the remote control.

PANASONIC chassis GP2A TX-29F250T, TX-29E220T, TX-29F155T, TX-29PM11P, TX-34P180T.
Log in menu «Service1» (geometry, RGB, sub.yaskravist):
Set Vol = 0, Timer = 30min (or 15 min), simultaneously press the button RECALL (on some models "DISPLAY" or "screen with a plus) button on the remote and" VOL-"on the front. To run the self press "VOL-" on the front and "Timer" on the remote control. Navigating the menu - red and green buttons, change settings - yellow and blue buttons. Memory write - "OK." Exodus - «NORMAL» .
Log «Service2»: Install 99-Channel. After logging in «Servise1», select «Sub-Brightness» and click on the remote «-/--». When you click in this mode «Display» is the entrance to the editor memory locations where you can manually edit the contents. Exodus - «NORMAL».

PANASONIC
Chassis LH18 LCD TX-32LXD1
Sign-in-one service:
- Set up for BASS, TREBLE to minimum.
- Set the TV program on the number 99
- Click once "INDEX" button on the remote and "N" at the TV.
Log in Service-2 (option):
- Being in a service, press the green button on the remote repeatedly to select the last item of service menu JPEG VIEWER.
- Click on HOLD, open the Tools menu of options-2.
Buttons Red / Green to navigate up / down.
Buttons YELLOW / blue to change the values.
To remember to click STR changes separately for each item
To exit the service off in another mode.

PANASONIC chassis LH65A TC-32LX70/700, TC37LZ85, TC-32LX85
Sign in service: click and hold "VOL-" on the front of TV, press RECALL on the remote 3 times within 2 seconds.
To exit the Service mode - press the POWER button on the remote or on TV.

PANASONIC Chassis M17 TC-25GF10R, TX-33GF15P
1.Vstanovit volume = 0.
2. Press simultaneously "RECALL" button on the remote and "VOL-" on the front of the TV.

PANASONIC Chassis M18, M17W GAOO TX-29GF25T, TX-33, 29GF85T, TC-1924, 28WG12H, TX-29GF35T - simultaneously press the button "OFF TIMER" button on the remote and "VOL-" on the front of the TV. To adjust the memory device after replacement set jumpers TPA4, three output circuits connected to IC1213 "body" chassis, and then turning on the power. device enters the mode MARKET MODE.
Exit: After the end of the process remove the jumper.

PANASONIC chassis MD3N TX-29P190T SDA5555DM
Option 1: Set the BASS control to max, and TREBLE control to min. Press and hold "VOL-" on TV. Press the "INDEX" on the remote control. Exodus - "NORMAL".
Option 2: Install the program 99, press the HOLD button on the control.
Exit "NORMAL"
Option 3: OFF TIMER 30 min, and simultaneously push the button on the remote control "DISPLAY", on TV bar "VOL-".

PANASONIC chassis MX-1A TC-21E1R processor MN152810TTC4
Click on the main board TV service button S1101. Appears RNA. After the first key press can be adjusted (adjustment of brightness, contrast, saturation, volume and phase (horizontal alignment)). The second you click to regulate modes RGB. Exodus - "NORMAL"

PANASONIC chassis MX-1A TC-14L3R, TX-21LT3P TC/TX-14/21L3P, R; TC/TX-14/21LT3P, R, TC-21E1R processor MN152810TTC4
Enter: press the button on the main board S1101 "Service". The screen lights up white box with no inscriptions. Clicking on "Function" change control (brightness, contrast, saturation, volume, tone, balance the horizontal). Change Level option buttons "VOL +", "VOL-". The second button brings S1101 TV service in the second sub-mode control: the level of black R, G, B, swing signal R, G and thin horizontal line. Exodus - "NORMAL"

PANASONIC
Chassis MX-2A, as for chassis MX-1A, TC-29V50R, processor MN152810TZN - click on the login button service switch S1101 (inside boards next to the switch vertical alignment). TV switch mode check, the screen appears CHK. Click on S1103 (FUN) to select the desired parameter adjustment. Exit - click S1101, or STAND BY and power off.

PANASONIC chassis MX-3 MX-3S TC-14F1, TC-F1D, TC-14L10R, TC1425RT, TC-20F1, TC-20L3R, TC-21F1T, TC-21L10R, TC21S10R, TC-2125RT, TC-2105RT, TX-2150T / TS, TC2150R, TC2150RM/RS, TC2170R / T processor MN152811TZT/TZX.
Hotel mode:
1. On the remote control - "OFF TIMER", the panel "CH UP" - enable.
2. On the remote control - "OFF TIMER", the panel - "VOL-" - disable.
Log in menu: Simultaneously press the "RECALL" button on the control and "VOL-" on the panel.
Exit - twice "NORMAL" on the remote control.

PANASONIC TX-29GF35T, TX-33GF85T, TX-29GF85T, TC-24WG12H, TC-28WG12H GAOO (option for chassis MX-3, MX-3C, MX-4S). Set Channel 60, TIMER = 30min and SHARPNESS - at least, and then click once button RECALL (on some models "DISPLAY" or "screen with a plus) in remote and VOL-button on the front of the TV. After replacing the memory device need initsializptsiya. To install this jumper TRA4 (contact 3 IC1213) to "ground". Turn the TV power. Apparatus enters the mode Market Mode. Memory write - key STR. Cofferdam after setting off.

PANASONIC Chassis MX-3V TC-14SV10S
Service for TV: Set the volume to zero. Press "MENU" and move the cursor to the position FEATURES. Press the OFF TIMER button and simultaneously press the right button on the control "RECALL" and "VOL-".
Tools for VCR: Set the volume to zero. Press "MENU" and move the cursor to the position FAETURES. Click the OFF TIMER. Just simultaneously press the right button on the remote cursor and "VOL-".

PANASONIC Chassis MX-4 TX-29V70T panel: TNQE145 TNQE147.
Hotel Mode: to cancel this mode, press the "VOL-" on your keyboard and TV OFF-Timer on the remote control.
Service menu:
1. set the volume 0.
2. Set the timer for 30 minutes.
3. Click RECAL on the remote and "VOL-" on TV keypad.
The screen shows RNA.
Select sub-menu buttons 1,2,3,4,5.
Exit from the menu - "NORMAL".

PANASONIC chassis MX-5 MX-5ATC-14D2, TC-2119R, TX-33GF15P, TC-25GF10R, TX-33GF15P, TC-20S2, TX-20S2T, TC-21Z2A, processor - MN1871681T,
Chassis MX-5Z TC-21D2Q processor TDA9381PS/N2/2I0905 N048Z, TDA9381PS/N2/2/0619 TDA9381N048M.
Set the volume on the TV equal "VOL-" = 0 and set the mode timer equal to 30 MIN. Then simultaneously press the CHANNEL UP button on the TV and RECALL on the remote control. Select sub -1, 2, 3, 4, 5. Exit - twice "NORMAL" on the remote

PANASONIC chassis MX-7 TC-21RM30RQ processor TDA 9384,
Chassis MX-7Z TC-15PM50R
Sign in service: set volume to "0" and the timer "30 MIN". The panel, press and hold "VOL-", and click on the remote control "DISPLAY" or "RECALL", (which looks like a screen plyusykom). Changing the menu buttons "1" and "2". Navigation through the menu buttons "3" and 4 ". Change "VOL +" and "VOL-". Exodus - POWER OFF

PANASONIC chassis MX-10 TX-29P80T
To log in to place the menu control with the following information: "SHARPNESS" of min, "VOLUME" of min, "BASS" to max, and "TREBLE" to min. At timer 30 min. Simultaneously press the button "Display" button on the control and "Vol-" on the front. Surcharge features - buttons 1-2-3-4, beginning - "NORMAL"

PANASONIC chassis MX-12 TX-29PS70T.
Entry: "VOL-" = 0, timer = 30 minutes, press RECALL on the remote and "VOL-" on TV.

PANASONIC NA8ML chassis - download details English description
PANASONIC NA8ML chassis - Download detailed english description

PANASONIC
CT32SX31CE chassis NA8ML - menu select SET-UP CABLE, set the timer for 30 MIN, press ACTION three times to exit the menu, turn on channel 124, set the VOL = 0, the front panel press "VOL-", with on screen ' appear red inscription CHK. When lit this inscription, while pressing the front panel buttons "VOL +" and "ACTION" activated transition from service mode (red inscription CHK) setting mode to the default settings (CHK Yellow Label) .. If the yellow caption quickly press CHK button VOL + / VOL: - ", then the selected service option is normalized.
In service mode, you can also login zamknuvshy each control point FA1 and FA2 onboard TV.
If you press POWER on the remote selected group of parameters that are marked in the menu letters B, C .... E. To check purity of color need to press RECALL button on the remote control. To exit the service mode hold down the button for 2 seconds ACTION and POWER on the front. While TV is turned off and immediately turned on Channel 3. All previous settings disappear channel, channels need to adjust again.

PANASONIC CF-27SF14/24/34V CT-31SF24 CT-31XE24CV CT-F29992LV/W/XV Zakorotit point FA1 and FA2 or pins 3 and 8 TP connector located on board A-BOARD.

PANASONIC
TX-25G10T (VOL) - at least, (TIMER) for 30min, press (VOL-) i (VOL +) on the front. Keys (1), (2) - choice of menu, CHK1-CHK4, (3), (4) - menu items, (VOL + / -) - Review.

PANASONIC Chassis Z5 TC14S1RCP, TX14S1TCC, TC21S1RCP, TX21S1TCC, TX21S1TCP processor MN152811TBS - click "OFF TIMER" on the remote and "VOL-" on TV. Click on STR for storing changes.
Exodus - "F"

PANASONIC chassis Z7 TX-21K1T / R, TX-21K2T, TX-14K1T, TC-14K1R, TX-14K2T, TX-21JTP3 processor SDA5254-A008
Select channel 60, set the "SHARPNESS" for min and simultaneously press the buttons "VOL-" and "OFF TIMER". Save values "STORE", exit "NORMAL"

PANASONIC chassis Z8 TX-21CK1 processor TDA9367PS/N1/4S0326, TX-29PM1P (chassis CP-521F).
Service - 1: select the channel 99, set the SHARPNESS at least. Press and hold the button on the remote control "MUTE". Press the TV button on the keyboard "V". Exodus - "NORMAL"
Sign in service - 2: being in a service, go to the line SUB-BRIGHT and press RECALL on the remote control.

PANASONIC Z-185 chassis TDA9381PS/N2/3I0785 MS9381/N2/3_DE1
select channel 99, set the SHARPNESS at least. Press and hold the button on the remote control "DISPLAY". Press the TV button on the keyboard "P-". Exodus - "NORMAL"

PANASONIC
2150: TIMER - in position OFF. Simultaneously press: on TV "VOL-", the remote "DISPLAY". Exodus - POWER OFF

PANASONIC
AG-4700BY - simultaneous pressing forward, backward, and discard the cartridge.

PANASONIC TC21-GF80R - simultaneously press the "RECALL" button on the control and "VOL-" on the front of the TV. Exodus - NORMAL 2 times

PANASONIC TX-21JT1P
Select 60 channel set to SHERPNESS = 0 and simultaneously press the buttons "VOL-" on the front and "OFF TIMER" on the remote control. Save values - "STORE".

PATRIOT
KM-2122 processor TDA 9381PS/N3/2/1830 delay in service menu:
One option - to lock the hidden button in the remote (if it CX3010 chip pins 11 and 25).
Option 2 - see the processor TDA9381-7NA.

PATRIOT KM-2111 / KM2112 / KM-2121 / KM-2131 / KM-2132A / KM-2135 / KM-2136 / KM-2138 / KM-2121 / Patriot KM-2911 / KM2912 / KM-2925 / HPC KM-2113 / HPC KM-2925 processor TDA9341PS/N3/A/1999, NTDA9341-2NDG
Sign in service - «MENU» «6", "4", "8", "3".
Select submenu - buttons "0 -4". Output - 2 times the button «Power» on the remote control.
Log in advanced service - «MENU» «6", "4", "8", "3», «Cal», «Lock», «5», «Cal», «Lock», «5.
Select submenu - buttons "0 -9.
Exit after initialization - «Power» «MENU» - «6", "4", "8", "3"

PHILIPS
chassis A8.0. For memory initialization and close contact 904 9040. To enter service mode simultaneously press "VOL -" and "VOL +" panel TV. Exodus - STAND-BY

PHILIPSchassis Anubis S \ DD, 14GX123OA, 14RT235A, 14RT300A, 2OGX105O-855, 21GX1560-8568, 25GX1880-1985, 29GX1890-1995, 21RT118A, 21RT128A, 21RT129A, 21RT132A, 21RT1ZZA, 21RT137 A 21RT138A. Sign in service mode in contact closure M31 and M32 (land) near IC7710. Exodus - STAND-BY.

PHILIPS EM1A chassis, EM2E, EMZE, EM5E, ES.1E, FL, GFL, L04A, L04E, MD2.21E, MD2.22, MD2.25E, MG2.1E, MG3.1E, MG3.2E, MG4.1E, MG5 .1 E, MG7.1E, 28RT71O6, 28RT715, 28RT72O6, 28RT73O6, 28PW8206, 28PW8506, 29RT8OO6, 28RT83O6, 29RT8346, 29RT85O7. 29PT8509, 29RT86O7, 29RT9007, 29RT9O47, 32PW8206, 32PW8406, 32PW8506, 82WA8416, 7OTA7216, 70WA8416),
chassis TE1.1E 14PT1347/01, 14PT1547/01, 20PT1547/01, 37TA1437/03, 37PTB1347/19,
chassis DPTV325 43PP8320, 43PP8420, 43PP8421, 46PP8621, 50PP8421, 55PP8620.
To enter the service menu: with remote fast (up to 4 seconds) to enter with control numbers 062 596 i press "i +" (mode SAM, Service Alignment Mode), or press "MENU" (mode SDM, Service Default Mode, to set the initial values of some parameters useful for the measurement of control points), while in the service menu allowed switching applications. In the right corner z'vytsya inscription DILLER, or SAM, or SDM.
In standby SDM regular menu is available, it appears when you press the button "MENU". Button "INDEX" turns-off mode OSD. For the transition to the SAM using the buttons "VOL +" and "VOL-" on the front and hold not less than 4 seconds. To exit the SDM or SAM mode power off.
Navigation in both modes - buttons "UP / DOWN".

PHILIPS
chassis D16-II, 25DC2660, 28DC2070, 28DC2670 80S31 processor to initialize memory - hold button on the TV "VOL +" and "P +", turn the power switch. For service mode to lock the control points M30 and M31. Exodus - TV.

PHILIPS
chassis D2-MAC, EUROCRYPT BBD-901
Sign in service: disable the network, press and hold button "+" and "-" on the front panel, turn on the network. Memorization of any change - through the "OK". Exodus - "STANBY"

PHILIPS Chassis D2-MAC, EUROCRYPT BDE-353
Sign in service: the buttons on the remote control in sequence: [TV DEC] [P +] [P-] [CLOCK-BUTTON] [I-II].
Memorization of any change - through the "OK". Exodus - "STANBY"

PHILIPS chassis E-6, 28PT4505 processor SAB-C502-2R20N
On TV and in the operating dial on the remote "TV" "i" "STOP", beginning - "STANBY"

PHILIPS Chassis FL1.10, 25PV7505 25SL550 33PT700A/712A processor SAB8032,
chassis FL1.7 28ML8600/00B processor SAB8032.
1. To lock the memory initialization point S24 S25 located on the board SSP. On the remote press "MENU", "Blue", "red", "MENU", "MENU OFF".
2. To activate the lock mode SERVICE MODE control points S23 and S24, located on the motherboard SSP, exit - STAND-BY

PHILIPS
chassis GR2.2 AA, 25PT400/42, 25PT410A/42, 28PT400A/42, 28PT450A/42. processor TMP47C1637. Lock contacts M33 and M34 (service) and hit INSTALL in the panel on the power. Inscription appears SER. To exit - on STANDBY.

PHILIPS chassis L01H.2E/AA, 14HT3304/01, 21HT5404/01Z processor TDA9552E, remote PC2882. Sign in service - 024 995 press "MENU" button or 062 596 "i", is another way to enter the service jumper zakorotyty 9631 and 9641. then turn on the TV button POWER. Code for lifting HOTEL - 319 753 and MUTE button

PHILIPS
chassis L01.1E.L01.2E, 25RT4107, 21RT5306, 24PW6006, 25RT4457, 25RT5107, 25RT5506, 32PW5407, 32PW6006, 63TA5216, 70WA6216. 82PW6216 Service menu: while in the user menu, click on the remote control: Cursor up, down, left, right.

PHILIPS Chassis L6.1, 21PT1342 processor TMP47C1637N, SAA5290,
chassis L6. 1 AA, 14PT-1432/43, 14PT-1352/00/01/05/07/11/39, 14,20 PT-1542/01/43, 14PT-1552/00/01/05/11, 20PT- 1342/43, 21PT-1532/58, 37TA-1232/03, 37TA-1432/03, 37TA-1462/18, 37TA-1473/18, 52TB-2452/19, M-2052/00/01, M- 2152/00 / 07/15, M-2182/00, M-M192/05,
Chassis L6.2 20PT1353 processor SAA5290ZP/039/040/055 - closed contacts S1 and S2 on the processor (14 output circuits IC7600).

PHILIPS
Chassis L6.2, 25PT4423 processor TDA9351
Remote control mode off once, then symknuty power when the LED goes out, turn on power while holding down the button "text" on the remote control.

PHILIPS chassis L6.2AA, 25PT4103/60 processor SAA5290ZP/040
Close control points "0053" and "0054" near the processor. Exodus - "STANBY"

PHILIPSChassis L7.1A, 14PT-118A \ 50B \ 67R \ 94R, 14PT132A \ 50B \ 50R \ 75R, 14PT133A \ 162R, 14PT137A \ 162R, 14PT138A \ 54R \ 58T \ 67R \ 71R \ 74R \ 75R \ 93S, 20PT188A \ 50B \ 67R \ 73R, 20PT120A \ 78R, 20PT132A \ 75R, 20PT137A \ 62R, 20PT138A \ 50D \ 58R \ 58H \ 58R \ 67R \ 71R \ 73R \ 74R \ 75R \ 94R \ 97R. Zakorotit contacts M24 and M25 on-board (PCB) and on the power. Out of service - click on STAND-BY. Attention error buffer is cleared!

PHILIPS
L9.1E chassis, L9.2A, 14RT2665/00 21PT1354/58C 21PT1654/58 21PT3882/59R 25PT5307 processor SAA5542
Sign in service menu: "0" "6" "2" "5" "9" "6" "MENU"; to log on to the geometry (non-SAM) simultaneously press the "VOL-" and "PR-" Panel TV . Attention! SDM function in AS OFF does not turn on, or (perhaps) your TV stop working. Exodus - "STANBY"

PHILIPS Chassis L6.1, 14PT1322, 14PT1323, 14PT1332, 14PT1342, 14PT1352, PT1353, 14PT1363, 14PT1372-374, 14PT1532-1553, 14PT1562-1563, 14PT1573-1574, 14PT2663, 14PT2683-2594, 20PT1342, 20PT1352, 20PT1353, 20PT1542-1553 , 21PT1342, 21PT1532, 21PT1542, 21PT2563-2584, 37TA1220, 37TA1232, 37TA1262-1263, 37TA1273, 37TA1432.37TA1462-1463, 37TA1473, 37TB1252, 51TA1232.51TA1262, 51TA1462, 51TA1472, 51TB1222, 51TB1252, 51TB1452, 52TA1262, 52TA1420-1462 , 52TA1472, 52TB1252, 52TB1452, 2TB2452, M1432-2052, 1932 M21, M21 and all the 52-2192 model chassis L6.2. Method 1 - closed contacts S1 and S2 on the processor (14 output circuits IC7600).
Method 2 - on the remote control model RC7150 service click on DEFAULT or ALIGN.

PHILIPSChassis L9.2A, L9.2E, 14RT1582, 14RT1782, 14RT314A / B-3822 14RT3722, 14RT414A, 20RT1582, 20RT1782, 20RT224V, 20RT324A / B-3882 20RT3722, 20RT424, 20RT524A, 21RT1532, 21RT1 582 21RT334A, 21PT3382, 21RT3722885, 21PT534A, 14RT1345, 14RT1354, 14RT1365, 14RT1565, 14RT2665, 14RA01, 17RT1564-1565, 20PR1 554, 20RA01, 20TA01, 21RT1364, 21RT1654, 21RT1664, 21RT1865-2265, 21RT2664-2665, 21RT2684, 21RT4255, 21RT4355, 21RT4455, 21RT4475, 21RT4655, 37TA1274, 37TV1254, 52TA1464, 52TA1474, 52TA441 5 52TV1454, 52TV4395 Press the MUTE button on the remote and no later than 4 seconds, R-, R +, VOL-, VOL + on the front of the TV.

PHILIPS
chassis MD1.1E 25PT4301, 25PT4501/60 TMP87CM36N-3270 processor, chassis MD1.2E, 24PW6322, 25RT4503, 25RT4513, 25RT4523, 25RT5123, 25RT5302, 25RT5322, 25RT5403, 25RT5424, 25RTB322, 28DW6734, 28RT4503, 28RT4513, 28RT4523, 28PW6202, 28PW6302 , 28PW6312, 28PW6322, 28PW6332, 29RT5123, 29RT5302, 29RT5322, 29RT5403, 29RT5423-5424, 29RT6413, 29RT6433, 29RT6773, 29RT8001-8005, 29RT8304, 29RT8344, 29RT9005-9006, 29RT9015, 29RT9046, 29RT9055, 29RT9113, 32DW6834, 2PWB302, 32PW6312 , 32PW6322, 32PW6332, 52TA4311, 63TA5213, 70WA6213, 70WB6193, 72TA5213, 82WA6213, 82WB6193. For service mode to lock contacts S42 and S43. Then click on the front of the TV at the same time "MENU" "P-". TV goes to standby SAM, if there are no mistakes and failures in the top row will be zero. Changes are automatically stored. Exodus - POWER OFF button on the control.

PHILIPS chassis MD2.11/12/13 - entrance is via a special menu control RC7150.

PHILIPS MD2.22E 25PT8303 Chassis
Simultaneously press the "?" and "SLEEP" under cover. Exodus - POWER OFF

PHILIPSchassis MG2.1E, 24PW8504, 25RT7304, 25RT8304, 28RT7104, 28RT7155, 28RT7204, 28RT7304, 28RT7404, 28PW8504-8505, 28PW9505, 28PW9515, 28PW9545, 29DS100, 29RT8001 -8005, 29RT8304, 29RT8344, 29RT9005-9006, 29RT9015, 29RT9046, 29RT9055 , 32PW8504-8505, 32PW8604, 32PW8806, 32PW9515, 32PW9523, 32PW9534-9535, 32PW9556, 2PW9566, 82WA8414 Press MUTE on the remote control and no later than 4 seconds "MENU" on the front of the TV. Also possibilities:
Mode SAM - closed for a second contacts 1 and 2 connector 0356 which is on SSP.
Mode SDM - closed for a second contacts 2 and 3 of connector 0356 that is on the SSP.

PHILIPS chassis MG3.1E 28PW9525 28PW8806 28PT7306/58
Type of remote combination. Then press "MENU" or "i". Presented several variants of code combinations.
"0" "6" "2" "5" "9" "6"
"0" "3" "6" "2" "5" "9" "6"
"0" "4" "6" "2" "5" "9" "6"
"0" "7" "6" "2" "5" "9" "6"
"0" "8" "6" "2" "5" "9" "6"
"0" "3" "6" "5" "9" "6"

PHILIPS 21PV288/58S EPSILON. To enter service mode to hold the PLAY button on the "TV" button "STOP" on the remote control about 5 seconds. Exit - click on "StandBy" console.

PHILIPS 14PV100/01 14PV505/58 processor SAA5541PS/M5/0194. Sign in service mode by the standby mode. You must simultaneously pressing "PLAY" on the TV and press "STOP" button on the control, while retain about 10 seconds.

PHILIPS 28PT4456/00 processor SAA5564PS/M3/0/81. To enter the service to close contact: "GND" and "SMD-servise mode" and turn on the TV in the network that is open 5-15 seconds.

PHILIPS 25PT4104/58 - two modes of service:
1) SDM - close control points on the chassis GND and SDM.
2) SAM-dial on the remote control, without breaks, 062 596 [] button enable OSD.

PHILIPS - Hotel profiles:
In models 25PT400/42, 25PT410A/42, 28PT400A/42, 28PT450A/42 hotel mode is activated while pressing the button VOL + and P + on the front panel for several seconds while the program turned 38. Off by pressing VOL-and P-well program in 1938. Programme 38 seconds and used usually for hotel management regime.
Model R-131, R-132, R-133, R-165 (chassis AA5) - enable channel 38 (this is important for all models), then hold "MENU" on the front and SLEEP (or OSD) on the remote control at least 4 sec.
H + inscription means that the mode vimkneno, H-off.
In models 3146, CTT-H instead of clicking on "MENU" button is used SELECT.
In models 3121 and 3122 while clicking on INSTALL and P + on the front at the time, not less than 3 seconds then turn off the console and enable key P + or P-.
In models R-217, CV6014, CV6107 clicking on INSTALL front and SLEEP on the remote control.
In models CV6012, CV6018, CV6109, ANUBIS S (AA, BB, CC, DD) to enable the hotel to keep the regime on the front panel keys and the P-STORE least 3 seconds. enabled the program to 38. To turn off - key P + and VOL-(at least 3 seconds), and in some models - and to turn.
The model ANUBIS S DD (and some others), hotel mode is possible only when enabled by an option when enabled 246 and channel 40. Possible option: turn on INSTALL and P +, INSTALL off and VOL-.
The model G8 must select VIDEO 2 mode and within one second press on the remote and TELETEXT FEATURE. Put in the appropriate menu OFF.
The model G88 as well, but using the SOUND ONLY.
The model PV4.0 on channel 38 on the remote click "PICTURE MENU" and FEATURE within 1 sec. to turn the hotel and click the PICTURE mode and OSD to turn.
In models Chassis GR1-AX (8-button front panel) to select channel 38, the simultaneous pressing on for 4 seconds and STORE P + hotel mode switches, STORE and CONTROL + (or STORE and CONTROL-) off. For 3-button front panel - simultaneously press STORE on the front and SLEEPTIMER on the remote for 4 seconds, or SELECT on the front and SLEEPTIMER on the remote. Green Label 'H +' on the screen means that the hotel enabled mode, and 'H-' - disabled.
read more...