TV Service mode for SAMSUNG SABA PROVISION POLAR RAINFORD ROLSEN (part 06)
PIONEER ----- SAMSUNG
POLAR 37CTV3160, 54CTV3160 - see chassis 3Y01
POLAR 13LTV1010, 17LTV1020. Processor LC863332B, TDA9381PS/N2/1I1150, TDA9381PS/N2/1I1246.
Sign in service menu: Turn on TV and in operating on the remote control buttons to press consistently "POWER", "MUTE", "CALL", "TIMER", ". Appears on the screen FACTORY. Press the button" TIMER ", starting first menu bar control the white balance. Go to the next line of control buttons is "CH", modified digital byte value - the buttons "VOL +/-".
POLAR TCL-A19V01-TO 8821CPNG4GD9 TCL-A19V03-TO 8821CPNG4U88 TCL-A19V07-PO 8821CPNG5SV5 TCL-A30V02-TO 8821CRNG4JB2
- See M28 chassis
POLAR chassis S02 S02-R S02-RT S02-R39 S0201 S0202. 3700, 3701, 5100, 5101, 5400 - see the processor SAA5531 SAA5541 (CTV832R)
POLAR chassis S03-z 37CTV1015 processor LT01D 51KC,
chassis of the S04-R S04-RT S04-R39 S04-z S04-z39 processor SAA5541/832R SAA5531/832R LT01D 51KC.
Sign in service mode is possible in two ways:
1. On the remote control service, click "FACTORY".
2 .. Turn off the TV in another mode, the RC-0201 remote control press "MUTE" and turn on the TV is operating. Moving in the service menu are made with remote keys "CH-", "CH". Tinctures are the keys of remote control options "VOL-", "VOL +". Once the installation to exit the service mode and save the data on the remote control key press "MENU".
POLAR chassis S05-z S05-I S05-z39 S05 S05-1 37CTV1010, 51CTV1010, 51CTV2010, 54CTV1039, 37CTV1410, 51CTV1410 processor SDA555XFL,
chassis S06-z S06-I S06-i1 51CTV1029, 51CTV2029, 51CTV2129, 54CTV1029, 54CTV2029, 54CTV2129 processor SDA555XFL,
chassis S52 S52-R S52-RTS processor CTV832R SAA5531 SAA5541 LT01D 51KC SDA555XFL:
Sign in service mode is possible in two ways.
Entry mode of SDM - Press 0 - 6 - 2 - 5 - 9 - 6 - button menu.
Entry mode SAM - Press 0 - 6 - 2 - 5 - 9 - 6 - button "display"
To TUNER KS-H-134 in the memory: 250-255-09-096-058-167-66
To TUNER DT-5BF-14D in memory: 250-255-09-224-058-167-66
On TV in operating on the service console press the "Clock" (on-board control in conventional circuits IC1 locking pins 1 and 15). Moving in the service menu are made with remote keys "CH-", "CH". Tinctures are the keys of remote control options "VOL-", "VOL +". Once the installation to exit the service mode and save the data on the remote control key press "MENU".
Withdrawal regime CASTLE: If forgotten confidential code, enter twice universal code "0711".
POLAR chassis S07 S07-2 51CTV1229, 54CTV1229, 51CTV4029, 54CTV4029, 51CTV4929 - see processor TDA9351 / TDA9381.
POLAR chassis S08 S09 3701, 5101, 5401, 5401-STEREO. 37CTV4110, 51CTV4110, 54CTV4110, 37CTV4010, 51CTV4010, 54CTV4010 37CTV4015. - See processor TDA9351 / TDA9381.
POLAR S-chassis processor 0906 37CTV4415 TDA9351PS/N2/2I1475 - - see processor TDA9351 / TDA9381.
POLAR Chassis 08-2560MT-MAN, 08-A2927U-OAT1E, 08-2559MT-MA2, 08-2959MT-MA3, 08-2960MT-MAN, T8-2561MT-MA1, M13, M24 63CTV3050, 70CTV3050, 63CTV3052, 70CTV3052, 70CTV3055, 63CTV3055,
Chassis 08-02159H-MA1, T8-2117MH-MA1, T8-2167MH-MA1, T8-2161MH-MA1, M23, M28 54CTV3060, 54CTV3062, 54CTV3065, 54CTV3068. Processor TMPA8803CSN - see chassis M28.
POLAR 3700 51CTV1010, 54CTV1039 - see processor SAA5531 SAA5541 (CTV832R)
POLYTRON chassis BML (HBEA-028B) MX-5203MS processor HBM-00-11M V.10
Sign in service: off mode Standby TV, press "MENU" and 1 s hold. Enter the Service code 1 0 March 1 "Service mode" or April 1 1 0 "Factory mode". To store data press "MENU" until the "stored" appears on the screen. To exit the service mode, turn off the TV in standby and switch on again.
LCD PREMIERA RTR-750 processor MST726-LF - universal remote control with IAC-2000, code 1312, entry button "2", bust button "7"
PRIMA M2153 processor chassis TDA9381PS/N3/2/1831 Ingredients: Tuner - LINGHUA TDL-3N4G BXATB138, HR - STV9302, UNCH - AN17821A, power - 5Q0765RT. Log on remote: press [MENU], you will see a menu image. Press the number buttons     on the remote control. To access the service menu M1 ~ M4, click the appropriate digital
button on the remote control. To log into the service menu 5 ~ M0, you must first press [CALL] to exit the M1-M4, you will see a letter "M", then click successively [LOCK] (picture suitcase with a handle) and one number buttons       to enter the menu M5 ~ M0. If you're in some of the menu M5 ~ M0, then move to another menu can be done without pressing the [LOCK], but the number buttons.
Hold the button "VOL +", switch network switch.
PROELCO, ELEMIS TAP2131, TAP2531, TAP2831 processor 82S52.
Close control points TR501. Hold R + R-"turn the power switch. Exit - take TR501.
PROELCO, ELEMIS, TRILUX Processor SDA20563-A508/A516/A518
Lock output processor 21 of the mass. Click on the TV "P +" and "P-" and turn the power switch. Exodus - POWER OFF
PROVISION L-1418T, L-2021T, L-2121T processor SAA5290 (CTV810S) - see chassis TV91
PROVISION ST-1410T - see chassis TV84.
PT90 chassis, processor TDA9350PS/N1/2K0172, ST92195C7B1/MIF:
Option 1: press SUB-PAGE (clock THT) on the remote and "VOL -" on the front of the TV.
Option 2: press the green button "FEATURES" and type 1923 (model CINEX TV37911), or in the menu go to "FEATURES" and enter 1923.
PT92 chassis, processor TDA9350PS/N1/2K0172 - press SUB-PAGE (clock THT) on the remote and "VOL -" on the front of the TV.
PT92 (Option 2) - 5 output connector service closed within the enclosure 0,3-0,4 seconds.
QUELLE 5100 chassis FT7126, FT7128, FT7129, FT7191, FT71263 processor 83S1540
Sign in service mode: for up to 5 seconds. switching from push button TV, PRG, EXT. Exit: turn off the power.
If someone accidentally activated the access code to the TV and the camera is not turned on, reset the code in the following ways, depending on the type (of five) using remote control. They are assembled on different chips. When power is enabled TV and briefly connect some remote parts of terminals provided deaktyvuvannya (withdrawal) code. In the panels on the chips and M3004LAB1 SAA3004P connect their pins 2 and 18 on chips K51900-43 and OHS2015DN - 18 output circuit with the output anode of diode D6, and the chip GMS30150 - and its withdrawal in April 1917.
RADUGA (Rainbow) 5561, processor ST92195, video processor STV2248C - see chassis 11AK30
RADUGA (Rainbow) 37TTS6222 - see chassis TV2KY
RAINFORD TV-1421 chassis 5889 processor TDA9341PS/N3/A/1999
Press the button "MENU", then dial 6483 to confirm sign appears "M". To exit press "Standby" button on the control. Removing the protection of children - code 4100.
RAINFORD TV-5510T, TV-7250T, processor TDA9353PS/N1/3S0342 - see chassis PT90, PT92.
RAINFORD TV5588SC CPU M37221M4-322SP - see M11D chassis
RAINFORD TV-5554 - press "VOL-" and "VOL +" on the front and "= o" (3 rysochky the clock).
RAINFORD TV-6392 - with remote control RC-5 (or universal remote MAK-2000, which introduced code 1255), with separate adjustable contrast, brightness, saturation - click on the "contrast," other relatives remote control are performed. Exit - on the remote control RC-5 click "kontrastnist-.
Hold "MENU" and "OK", press "VOL +" "MENU" "POWER" "VOL +"
REKORD (record) Chassis G-1000 51/54 TTS5171 processor MC44002 MC44140
You must power off and turn it by holding the button on the toolbar "R + and R-. At the bottom of the screen appear the letters GLHPRGB A. Active highlighted in yellow. Changing the console with the button "menu" Settings "R + R-. Mode "G-" - U of kinescope setup, the screen shows a red or green square. Must be set so that they both quenched. Exodus - POWER OFF
REKORD Chassis H-501, H-501V PEKOPD XANTRAX 51/54TTS5168 51/54TTS5169 CPU Z8624704PSC - to enter the service menu to consistently push the button on the remote: "DISPLAY" "MUTE" "SLEEP" "FUZZY". Then when you click "DISPLAY" - geometry adjustment and AGC, and when you click SLEEP - white balance. Exodus - POWER OFF
REKORD ST-201 chassis 14/51/54 TTS5169 51/54TTS5172 STV9424 processor 80S31.
To enter the menu to hold the front of the TV press "MENU" and "CH +" turn on the switch network. Then withdraw from the TV STAND-BY in the usual way. Then a menu on screen. Exodus - POWER OFF
REKORD ST-208 chassis, ST-209 TC-1466, TC-2066S, TC-2166S, TC-2068S, TC-2168S, processor management MTV212MS64U, video processor TDA8842,
ST-210 chassis RECORD 51TTS5175, 37/51/54TTS5173, processor management MTV212MS64UB video processor: TB1238Z.
Sign in service regulatory regime from the normal control: in the regular mode of the TV series on the remote control button press MUTE, AV, "MENU", POWER. In the main user menu appears a new line - SERVICE.
To access basic service menu, press the remote button "VOL +".
Regulation of the function is pressing the remote button "VOL +" or "VOL-". Choose a new feature is a button on the remote control "P +" or "P-".
SCREEN-reg. screen settings
CATHODE-reg. pezhymiv cathodes
TUNING-tuner option selection
OSD Pos. OSD-position adjustment Horizontal
Groups SCREEN, CATHODE, TUNING have their submenyu:
H SHIFT 1931 Horizontal centering
V SHIFT 1931 centering on a vertical
V SIZE 31 Size Vertical
V SLOPE 31 Vertical linearity
S CORR 1931 S-correction
R 1931 R in black
G 31 G in black
B 31 B in black
SBT 1931 Sub'yaskravist
SCT 31 Subkontrastnist
AGC AGC 1931
CTT 5020E 38.9 Selecting the type of tuner
This scheme can be used the following types of tuners:
UV1316 / S I2 38.0
UV1316 / S I2 38.9
IF automatically adjusted when choosing the type tuner.
Meaning of regulated functions are written in memory automatically. TV returns to normal operation after turning off the network and re-enabled.
REKORD chassis TD -18 (PAEX0088) 37/51/54TTS5177 51/54TTS5168 51/54TTS5176 TS-2076/2176 54TTS5172 TC-2172, processor management TMP87CK38N, video processor TD1238N.
Used three service mode: S, D, M.
S-mode - a service;
D-mode - extended service;
M-mode - + accelerated training.
Login to "SERVICE MODE" from the normal control:
operating of the TV, press and hold the button on the front panel VOL-(volume at minimum position), press the button on the remote DISPLAY. In the upper left corner of the TV screen appears the symbol "S", which means a service enabling a special mode of regulation.
Choose a new function is pressed on the remote control buttons or PROG + PROG-. Regulation of the function is pressing the remote button "VOL +" or "VOL" -.
When you click on the remote screen -/--na lost personnel scan.
Meaning of regulated functions are written in memory automatically.
TV returns to normal operation after turning off the network and re-enabled.
Joining the advanced D-mode service
1. In the operating mode of the TV to reduce the volume to 0 value, then press and hold the front panel button "VOL-", click on the remote control button "DISPLAY" (while the TV goes into the S-mode service).
2. Release the front of the TV button "VOL-", click the button on the remote DISPLAY. Double click on the front of the TV button "VOL-" and again click the "DISPLAY" (while the TV should go to service mode "D"-advanced service).
Use the specified rewrite the values in memory when the so-called processor failures (eg, involuntary initialization, zeroing set of values).
REKORD Chassis 200-100-TV2K 37/51/54 TC 5188, processor ST92185, video processor: STV2246.
Sign in service mode is possible with the revised remote control. You must remove the top cover panel, break a window at the bottom of the lid green button on the remote SERVICE (button entering service mode). Set in a window formed any button that has great practical significance, preliminary vyrizavshy it. Then click SERVICE, on your TV menu appears SERVICE V2.0.
Move the cursor is on the line by using P +, P-. Change the parameter value is controlled using the buttons "VOL +" or "VOL-".
Adjust the accelerating voltage is as follows:
-Set the cursor in the main menu bar at the Red Gain, at the bottom of the TV screen appears scale "G2 status";
Rotation-voltage regulator to set TDKS "G2 status" in position "OK".
Setting IF is as follows:
By the terminals 10, 11 FCC connect signal cable IF (38.9 MHz, 50mV). When connecting the cable to ensure that output to 11 pidklyuchavsya output signal cable and output to 10 - housing;
-Set the cursor in the main menu on line VCO FINE 070. Adjusting coil L208 to the appearance of the inscription "AFC Status OK";
-Clicking "-" on the remote to find the lower limit of the range set IF (inscription disappears OK). Then click the "+" button on the control and increase the VCO FINE 5 units. Transfer the cursor to the VCO Coarce - must be installed in 2005 and light show "OK".
Exit - click SERVICE.
D - service mode chassis PAEX0060
RCUT 80 (0 - FF) Adjust R
GCUT 80 (0 - FF) Regulation G
BCUT 80 (0 - FF) Regulation B
GDRV 40 (0 - 7F Regulation G
BDRV 38 (0 - 7F) regulation
CNTX 3F (0 - 3F) Sat. contrast MAX
BRTC 48 (0 - 7F) Sat. brightness CENTER
COLC 40 (0 - 7F) Sat. saturation in NTSC
TNTC 40 (0 - 7F) Sub.kol. tone CENTER
COLP 10 - (80 - FF) + (0 - 7F) Sat. saturation in PAL
COLS 54 (0 - 7F) Sat. saturation in SECAM
SCNT 0C (0 - 0F) Sat. Contrast "Y"
CNTC 30 (0 - 3F) Sat. contrast CENTER
CNTN 00 (0 - 3F) Sat. contrast MINIMUM
BRTX 35 (0-7F) Sat. MAXIMUM brightness
BRTN 31 (0-7F) Sat. brightness MINIMUM
COLX 35 (0-7F) Sat. saturation MAXIMUM
COLN 00 (0-7F) Sat. saturation MINIMUM
TNTX 28 (0-7F) Sat. color tone MAXIMUM
TNTN 28 (0-7F) Sat. color tone MINIMUM
ST3 25 (0-3F) Sat. Definition NTSC3.58 in TV CENTER
SV3 25 (0-3F) Sat. Definition NTSC3.58 in VIDEOCENTER
ST4 25 (0-3F) Sat. Definition CENTER Other color system in TV
SV4 25 (0-3F) Sat. Definition CENTER Other color system in AV
SHPX 35 (0-3F) Sat. Definition MAX points from Center value
SHPN 35 (0-3F) Sat. Definition MIN points from Center value
TXCX 35 (0-3F) RGB "OSD" in contrast MAX
RGCN 25 (0-3F) RGB "OSD" contrast MIN
VM0 0E (0 - FF) VCD mode data0 "Setting Data of TB1238"
VM1 00 (0 - FF) VCD mode data1 "Setting Data of TB1238"
HPOS 13 (0 - 1F) Horizontal alignment
VP50 03 (0 - 07) Vertical alignment
HIT 1D vertical size
VSC 09 Vertical S-correction
SBY 02 (0 - 0F) Zero-discriminator SECAM BY
SRY 05 (0 - 0F) Zero-discriminator SECAM RY
RAGC 19 (01 - 3F) delay adjustment ARU
AFT 1940 (0 - FF) Regulation FD
HAFC 00 (0 - 03) 1 / 2 AFC Data Adjustment
V25 25 (0 - 7F) Volume Output Data at 25%
V50 50 (0 - 7F) Volume Output Data at 50%
MOD0 42 (0 - FF) Mode Data0
MOD1 60 (0 - FF) Mode Data1
MOD2 05 (0 - FF) Mode Data2
SELF 00 (0 - 03) Test-self
SELF VOC 80 (0 - FF) VCO test-self
SELF AGC 69 (0 - FF) AGC test-self
SELF BRTC 75 (0 - FF) BRIGHT CENTER test-self
SELF CNTC 23 (0 - FF) CONTRAST CENTER test-self
SELF TNTC 00 (0 - FF) TINT CENTER test-self
SELF COL 20 (0 - FF) COLOR CENTER test-self
OSD 17 (0 - 7F) OSD-position on the screen
OPT 07 (0 - FF) Option Selection
Bit7-5: No Use. Bit4: 1 Not VT Down of AFT when no signal
Bit3: Audio Gain SW of TB1238
Bit2: V-MUTE On (= 1) / Off (= 0) when CH changes
Bit1: EXT-MUTE On (= 0) / Off (= 1)
when B.B is Off in no Signal
Bit0: MUTE On (= 0) / Off (= 1) when BB is Off in no signal
REKORD 54TTS5188 processor ST92185BN2B1/EUA TV2KV Ver.4.511, OSD processor MTV018N24-35, video processor STV2246 X43. Sign in service: Click the button on the remote control hidden under "P-" Chip remote SD3331AD (pins 8 and 17). Menu Design - enter the service and click "OK".
REKORD CT-2197K CPU TDA9381PS/N2/3102. Sign in service: in the native remote control hidden button (below and livishe V +). Clicking
displays "M" in the menu section 9. Exodus - hidden button and turn off the TV.
ROADSTAR CTV1433, processor ST6367 - see chassis 11AK20
ROADSTAR CTV1412XT processor SDA5552, SDA552 - see Chassis 12.4 / 5.
ROADSTAR CTV6010 processor ST92195 - see chassis AK19PRO, 11AK30, 11AK36.
ROADSTAR processor TDA9353, TDA9362 - see chassis CTG-AA
ROADSTARCTV1418 processor TMP47C634, SAA5288, SAA5290 - see chassis CTN-BB.
ROADSTAR CTV1010XK processor TMP87CM38N - see chassis CTS-AA
ROADSTAR chassis VE01, 1450KT, 2050KT, 2150KT, processor TDA9361
Procedure entrance to the service menu:
1. Press the button "MENU" button on the control.
2. Press 6,4,8,3 on the remote control.
3. M - appears on the screen.
4. Press 1,2,3,4.
5. To change - press Volume + / Volume-, to move from option to option-Channel + / Channel-on the remote control.
6. Stand By Clicking on the remote control to exit Service Mode.
The procedure entry in Design Mode
1. Press "MENU" button on the control.
2. Press 6,4,8,3 on the remote control.
3. M - appears on the screen.
4. Press 5 on the remote control.
5. Click Lock on the remote, TV goes to Design Mode.
Switch SW502 mode service menu.
ROLSEN C2910, C2519, C2988, C1410, C1420, C2116, C2118, C2119, C21R21, C2121, C2190, C21R90, C1420, C1425, processors CH08T0934, TDA9381PS/N2/2I1091 CH05T0102 EX-1A1, TDA9381PS/N2/2I1229, TDA9381PS/N2 / 2I1373.
Sign in service menu as follows:
1. Set the volume equal to 0.
2. Press the remote button "MUTE".
3. While holding "MUTE", press "MENU" on the front of the TV.
4. On the top right corner will light up the letter "D", and in the left corner shows an adjustable parameter and its value.
5. Pages menu change button "CAL" switch settings made green and red buttons on a blue field panel. Change made a yellow and blue buttons on a blue field. Note: do not change without the value of other parameters, it can cause loss of factory settings. When the factory settings to avoid loss of desirable first to record the value of all parameters on a piece of paper so you can restore factory settings in case of their loss.
ROLSEN S1455, S2156-S2159 CPU TDA9381PS/N3/3, C72FDS107, C72FDS109.
Press the button first [PRESET], then [TEST] remote service, on-screen in the upper right corner appears the letter M. To exit service mode, press [TEST] on the remote control service. You can also exit the service mode by pressing the [STANDBY].
Sign in service mode with user control: press [MENU], you will see a menu image. Press the number buttons     on the remote control. To access the service menu M1 ~ M4, click the appropriate buttons on the remote control. To log into the service menu M5 ~ M0, you must first press [CALL] to exit the M1-M4, you'll see the letter M, then successively press [LOCK] (picture suitcase with a handle) and one with digital buttons       to enter the menu M5 ~ M0. If you're in some of the menu M5 ~ M0, then move to another menu can be done without pressing the [LOCK], but the number buttons.
In service mode when you click [-/--] can log mode BUS OPEN. When you click the button going way out of this regime.
ROLSEN C2131, C2133, C2150, C2192, C2195
To enter service menu you can use one of the following ways:
1. Lock for a short time 1 and 3 contact connector X2 through resistor 2.2 kOhm.
3. Using the normal remote control, click the following shortcut:
• reduce the volume to "0"
• click the «MENU»
• select the icon "suitcase"
• consistently score "5" "1" "7"
• press the green button
Exit service menu by pressing the button TV / AV button on the remote control. This record is in memory of all service settings menu.
ROLSEN C1440, C2146, C2148, C2139, C2150SEZ
Button "V +" on the TV and the "0" on the remote in safe mode.
ROLSEN C2150Z processor TDA9381PS/N3/1/1730.
Menu similar to LG, the entrance to the service menu: set volume to "0", disable TV in another mode, press and hold the "V +" on the TV, then press the "0" on the remote, hold the click until the brightness of the glow LEDs Green did not increase. You should show povitsya IF 38.0, memory settings - click TV / AV on the remote control.
ROLSEN C2160, C21R65, C2165, C21R65
Sign in service menu as follows:
Press the "Vol-" on the front of the TV, to reduce the volume to 0, click the "Display" on the remote control, keeping the "Vol-" on the front. To exit the service mode turn off the TV
ROLSEN C21SR80NT processor TDA9352PS/N3/1/1683, C29SR45T processor TDA9565, C29R25T processor TDA9352PXN, D29R55, C29R40T processor TDA9365PS/N3/5.
Entry: "St-by"> "MENU" on TV + "0" on the remote control. Exit> "TV".
In the service can login to normal control.
We must open the console closest to the chip contact area is taken up by the button. If the switch, the TV will enter service mode.
ROLSEN C1470 (S) (T), C15R80 (S) (T), C17R80 (S) (T), C2170 (S) (T), C21R70 (I) (T), C21R68, C21R80.
TV - in the regular mode, then hold the button "MENU" (in some firmware versions of the processor should use the "Volume +" on the front panel) TV and press "0" on the remote control.
To remember the settings click the button and the TV, hold it, turn off the TV from the network.
Removal of the castle: in the Options menu and select Castle consistently score 2 -2-I (white button).
Turn off the hotel: in the Options menu item indication, press and hold clock until the upper right corner appears the inscription HOTEL OFF.
ROLSEN C29R100, C29R140, C29R142, C29R148
Service desk at 100 Hz Rolsen done with any RC-5 compatible (on the 3010 chip).
Enter service mode (do consistently):
SVC 1.Natysnuty button on the remote control service for half a second (or closed at the same time, contacts 1 and 11).
2. Click "OK" button on the remote control.
ROTEX TH-2986S - see START 1416A, 2136QF.
ROTEX chassis U3P/U2P TH2196 processor TDA9381PS/N2/2I1318 - see processor TDA9381-7NA.
ROYAL TV6399TSN, TV5599TSN, TV5490TSN processor ST9 MONICA 5.
On TV, pressing the button a few seconds "VOL-" and "VOL +" on the front of the TV.
Exit: CLEAR button or power off.
RUBIN (Rubin) 72DS10 72FDS10 55FS10 55FM09-8 37M10 51M10 63M10 72S10, processor TDA9381PS/N2/1I0721 RUBIN OSD V1.2 M10,
TDA9381PS/N2/1I0836 RUBIN_OSD_V1.4 M10,
TDA9381PS/N2/1I1156 RUBIN_OSD_V1.5F M10,
TDA9381PS/N2/1I1520 RUBIN CLK V1.7B,
TDA9381PS/N3/1/1729 RUBIN CLK V3.0A M10.
To enter the service you need in safe mode press the menu button on the front of the TV and the "0" on the remote control.
To remember the settings you have to click "TV" and hold off from network TV
Removing lock: enter the Options menu, select Castle, dial "2", "2", "white button".
RUBIN range of S06. To enter service mode in AV button is power on the TV and hold it five seconds, or close to 250-500 milliseconds contacts 6 and 7 service connector.
Select options button "P +" or "P-", change the value "VOL +" or "VOL-". Making the memory button "TV".
Installation / removal mode "hotel"
1.Zayty in the "Features" menu (the menu button or the blue button remote control).
2.Vstanovyty with transparent background panel menu (see Manual).
3.Vstanovyty cursor to the line-turn.
4.Natysnuty and hold the remote on / off button hidden teletext reception to appear in the right corner of the screen caption HOTEL ON / OFF.
Mute mode lock without dialing code:
1.Vviyty Features menu (the menu button or the blue button remote control).
2.Vstanovyty with transparent background panel menu (see Manual).
3.Vstanovyty cursor to the line lock.
4.Natysnuty and hold the remote on / off button hidden until the reception of teletext caption CASTLE OFF
NOTE: CASTLE line can be displayed in the Options menu, if enabled mode HOTEL, chassis M06.
RUBIN S07 processor lineup SAA5531PS/M4/0599.
On television when you click "Vol +" and "MENU" on the front of the TV.
Navigation menu - buttons "R +" and "P-" buttons to adjust "Vol +" and "Vol-"
SA-A chassis controller LA76931, LA76936, LA76938 - see CPU SDA5522.
SABA NR26LXC29 delay in service menu: "MENU 9301".
SALORA 28F8 32F8 36F8
To enter service mode press "II", "I", ">", "IV".
SALORA 28N8S processor ZC410929P - see chassis EUROSTEREO, 2B-F.
SALORA 25V80, 28V80 29V100 processor SDA30C163 - see chassis FEATURE STEREO.
SALORA M1 chassis 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI processor CCU-SALO-07 (CCU20XX) - Entrance "C", "*", "O / V", "#", "M". Exodus - "TV".
SALORA Chassis M2 DIGI STEREO 25M9C processor CCU-SALO-09 "CCU20XX"
input "P +", "*", "O / V", "#", "M". Exodus - "TV".
SALORA 14MP50 VT, 20MP50 VT, 21MP50 VT processor SAA5222, SAA5223, SAA5253, SAA5255 - see chassis MONO PLUS 2
SAMPO - Network device reset button and hold for several seconds.
SAMSUNG chassis KS1A CS 2139TR CS21A0QWT CK-564BVR CZ-21H12T CS-25M6HNQ CS-21S4WR CS-21S1S CS-21D9 processor SAA5291PS/135,
chassis KS2A CS2902, CS-21AOWTQ processor SDA5555, video VDP3120B,
chassis KS7A CS-29K10MQQ processor VCT49X3E PY E 1000 (T-ETRASF 1002),
Chassis: KS9A CS-15N11MJQ SS14H2, CB15R2X, CS20H2, CB20R1X, CB21F5X, CB21DBCX, CS21M16M QZXNWT, CS21M20M QZXNWT,
chassis KS9B CS-21M6MQQ processor TDA9594PS/N1/5I,
KSBA 21Z43ZGQ processor chassis TDA12176PS,
Chassis L63A SP-61L2HR, L63A SP-43L2HR,
chassis S16, CS-29K5ZQQ processor TDA 12025PQ/N1F80,
chassis S51A CK-2199X3X/VWT, CK-22B4VR, CK-22B5SXR, CK-25D4V3X/BWT, CK-25D4VR, CK-28C7VD3X/XEH, CK-2902NXR, CK-2902SXR, CK-29D4V3X/BWT, CK-29D4V3X / NWT, CK-29D4VR, CK-30D5X3X/NWT, CK-564BVR3S/NWT, CK-565BSR3S/NWT, CK-566BSX3S/NWT, CK-567BV3X/BWT, CK-568BSX3S/NWT, CK-568BSX3X/NWT, CK - 6202X3S/NWT, CK-6202X3X/BWT, CK-62D4V3X/BWT, CK-7202SX3S/NWT, CK-72D4V3X/BWT, CK-765DSX3X/NWT, CK-765DSXR processor SAA5291PS/135,
chassis S63B processor Shine2 CW29Z308TXXXEC,
chassis VC20EO LM20M21C,
CZ-14F-12T, CW-21M63N processor SDA5555,
LCD LE20S52, LE40S71B,
Processor TDA9381PS/N1/3S0333 SPM-802ERN5, TDA9381PS/N2/2/1642 SPM-802EEN6, TDA9381PS/N1/3S0293 SPM-802ERN4, TDA9381PS/N1/3S0250 SPM-802ERN1.
Press the sequence (STAND-BY) (DISPLAY) (MENU) (MUTE) (POWER ON), or (STAND-BY) (INFO) (MENU) (MUTE) (POWER ON), Go - POWER OFF
Service menu consists of four components:
ADJUST, OPTION, G2 ADJUST, and RESET.
For selecting and adjusting the parameters using buttons /-CH and /-Vol.
To exit the service menu press the button POWER OFF.
Options: AGC 15, VCO 80, SBT 7, SCT 7, SCR 10, SC0, RG 1945, BG 1945, CDL 3, STT 5, LC) 0, VOL 10, PSL 13, PVS 1957, PVA 1930, PHS (left -right) 35, PEW (width) 50, PEA (arc) 33, PET (trapeze) 0.
SAMSUNG Chassis: SCV11A, SCV11D, TVP3350, TVP5050, TVP5350, TW33501S,
Chassis SCT-11D CK-3338ZR1BWX, CK-3373TR1BWX, CK-3373ZR1BWX, CK-5038ZR1BWX, CK5073ZR1BWX, CK-5373ZR1BWX, CK-5079ZR1UKCX, CK-5085ZR1/ZBR1/TBR1BWX, CK-5339ZR1/TBR1/TRB1BWX, CK-5379TR1 / ZR1UKCX, CK-5385TR1/ZR1/ZBR.
Login - STAND-BY -> P. STD -> MENU -> SLEEP -> POWER ON.
The second option - STAND BY -> P. STD -> HELP -> SLEEP -> POWER ON. After logging into the service mode menu appears on the screen: ADJUSTMENT, OPTION BYTE, RESET.
SAMSUNG chassis KS3A CS25M6HNQ processor SDA555X,
chassis S56A CZ-29M64N, CS-21M6, CS-21S8MHQ processor TDA9594PS/N1/4I1021 (SPM-836EE).
Login Service: (PICTURE OFF) (DISPLAY) (MENU) (MUTE) (PICTURE ON)
SAMSUNG chassis P1B CB5373Z/UKV CPU Z8933212PSC-R1971, SAA5290ZP-020
chassis SCT11A CS-5038Z processor SZM-139M3, video M52039SP,
chassis SCT11B, SCT12B, SCT-13
CK5038ZR CK271WP CK6202 CK7202 CK-5379ZR CK6271WP CK331EZR48, CK333EZR4X, CK3366ZR4X/BWT, CK3373ZR4X/BWT, CK501EZR4X, CK503EZR4X/BWT, CK5066ZR4X/BWT, CK-5039ZR4X/NWT, CK-5385ZR, SC-3339Z processor SPW149-2001 Z8933212PSC,
chassis SCT57A CK-7202WTR,
Sign in service:
(STAND-BY) (P. STD) (HELP) (SLEEP) (POWER ON). Exodus - (STATUS) or (HIDDEN).
Approximate installation service menu: ADJUSTMENT AGC20, VCO88, SBT10, SCT15, SCR10, SC10, RG35, GG40, BG41, CDL0, BLU0, PSL20, PVS44, PVA45, PHS44, NSL20, NVS40, NVA50, NHS40, OPTI BYTE: BYTE0 08, BYTE1 99.
SAMSUNG Chassis SCT-51A SCT-52A CS7272 CS6277 SS7277 CS-721, CS-723 CPU RM132ER-SSOM132ER (CXP85340A-152S/176S).
Sign in service:
(PICTURE OFF) (SLEEP) (P. STD) (MUTE) (PICTUPE ON). Exodus - (STATUS).
SAMSUNG chassis SK15 CS-29A6HTR PLANO.
Sign in service:
(STAND BY) (DISPLAY) (P. STD) (MUTE) (POWER ON), Go - (POWER OFF).
SAMSUNG chassis S65A P9050L, CXA2165Q, TW9906, SMP6773, processor SAA5291PS-135,
chassis SCT57B CK-22B5SXR CK-565BSXR SAA5291PS-processor 135.
Login Service: (INFO), (FASTORY), (FASTORY). Exodus - (MENU) or twice (FACTORY).
SAMSUNG chassis S15A CK2139XR processor SAA5291PS-097
1. TV switch to operating mode.
2. on the remote press "sleep" with a logo clock.
3. click on the remote control button hidden "factory".
You will see signs: ADJUST OPTION RESET
Regulation of V-, V, P-, P.
Adjust value: AGC September, VCD 1980, SBT 8, SCT 1910, SCR 1910, TSC 1913, SC 1912, RG 47, GG 32, BG 34, CDL 4, LU 0, PSL 32, PVS 32, PVA-1942, PHS -40, OPTION better not touch. input in memory - "sleep", output - 2 times "Factory"
SAMSUNG chassis Z68 CI5937AN, CI6837AN
Sign in service menu:
Option 1. Press the service button hidden on the front of TV.
Option 2. In STANDBY mode, press the remote control:
"Video prefer", "A / V", "Sleep timer", "Power".
SAMSUNG Z68 processor chassis SIM131
Sign in service menu:
In STANDBY mode, press the remote control: "AV" "SLEEP TIMER" "POWER", beginning - "POWER OFF".
SAMSUNG chassis Z70 CK-6271WP CK-7271WP processor SIM 131-1 C69532Y, CS-21K3ST.
To enter service mode need to turn on the TV is operating, then click the button panel in the following sequence: "STAND BY" "MUTE" "1" "8" "2" "POWER ON". Exodus - "POWER OFF".